Zhengbo Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Zhengbo Jiang has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Wei Hong
Southeast University
12 shared publications - Zhang-Cheng Hao
State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, China
10 shared publications - Chong Guo
Meatron Electronics, Nanjing, China
6 shared publications - Jixin Chen
Southeast University
4 shared publications - Fan Wu
Southeast University
3 shared publications Mengjie Yan
School of Information Science and Engineering and the State Key Laboratory of Millimeter Waves, Southeast University, Nanjing, China
3 shared publications
Latest Publications
- 12 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25  (4) , 1777-1781
Multiple Test Zones Synthesis in Multiprobe Anechoic Chamber Setups for Over-the-Air Testing
Addressing the demand for simultaneous multi-user over-the-air (OTA) testing, this letter presents a novel field synthesis-based method to construct multiple test zones (TZs) within a multi-probe anechoic chamber (MPAC). The work establishes a system model for multi-TZ emulation, characterizing dual spherical TZs in single-ray plane wave scenarios, and subsequently introduces a genetic algorithm (GA)-based probe selection strategy tailored for multi-TZ synthesis. Comprehensive simulations utilizing clustered delay line (CDL) channel models validate the reconstruction accuracy in both dual-TZ and triple-TZ setups. Consequently, the proposed method provides a robust solution for parallel multi-device OTA testing.
- 12 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25  (4) , 1777-1781
Multiple Test Zones Synthesis in Multiprobe Anechoic Chamber Setups for Over-the-Air Testing
Addressing the demand for simultaneous multi-user over-the-air (OTA) testing, this letter presents a novel field synthesis-based method to construct multiple test zones (TZs) within a multi-probe anechoic chamber (MPAC). The work establishes a system model for multi-TZ emulation, characterizing dual spherical TZs in single-ray plane wave scenarios, and subsequently introduces a genetic algorithm (GA)-based probe selection strategy tailored for multi-TZ synthesis. Comprehensive simulations utilizing clustered delay line (CDL) channel models validate the reconstruction accuracy in both dual-TZ and triple-TZ setups. Consequently, the proposed method provides a robust solution for parallel multi-device OTA testing.
- 4 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74  (3) , 2770-2781
Over-the-Air Testing on Artificial Intelligence-Based Beam Management Evaluation of Millimeter-Wave Devices
This paper proposes an over-the-air (OTA) channel emulation methodology within the multi-probe anechoic chamber (MPAC) framework to test artificial intelligence (AI)-based spatial-domain beam management (BM) for millimeter wave devices. The reconstructed channel provides reliable measurements as AI input and accurate ground truth for validating AI predictions in instantaneous multi-beam environments. Base station (BS) filtering is applied to the Cluster Delay Line (CDL) channel model, which results in rapid fluctuations in the propagation environment at the user equipment (UE) side during the BM procedure. Two novel approaches-approach A and approach B-are proposed to emulate the instantaneous multi-beam channel environment, with approach A suitable for emulating random target beams and approach B for pre-defined ones, respectively. Both approaches are based on the Beam Power-Angular-Spectrum Similarity Percentage (BPSP), a new metric introduced to evaluate the channel accuracy of reconstruction. Simulations and experimental results are presented to validate the accuracy of the channel reconstruction. Furthermore, the performance of an actual AI model deployed at the UE side is evaluated using the proposed methodology.
- 4 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74  (3) , 2770-2781
Over-the-Air Testing on Artificial Intelligence-Based Beam Management Evaluation of Millimeter-Wave Devices
This paper proposes an over-the-air (OTA) channel emulation methodology within the multi-probe anechoic chamber (MPAC) framework to test artificial intelligence (AI)-based spatial-domain beam management (BM) for millimeter wave devices. The reconstructed channel provides reliable measurements as AI input and accurate ground truth for validating AI predictions in instantaneous multi-beam environments. Base station (BS) filtering is applied to the Cluster Delay Line (CDL) channel model, which results in rapid fluctuations in the propagation environment at the user equipment (UE) side during the BM procedure. Two novel approaches-approach A and approach B-are proposed to emulate the instantaneous multi-beam channel environment, with approach A suitable for emulating random target beams and approach B for pre-defined ones, respectively. Both approaches are based on the Beam Power-Angular-Spectrum Similarity Percentage (BPSP), a new metric introduced to evaluate the channel accuracy of reconstruction. Simulations and experimental results are presented to validate the accuracy of the channel reconstruction. Furthermore, the performance of an actual AI model deployed at the UE side is evaluated using the proposed methodology.
- Open Access
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 5  (3) , 640-653
Design and Verification of a Massive MIMO Channel Emulator for 5G/6G System Performance Testing
Channel emulator plays an essential role in 5G and 6G communication by enabling the reconstruction of wireless channels in a controlled laboratory environment. A novel massive multiple input multiple output (MIMO) channel emulator is presented in this paper for future communication. The proposed channel emulator operates at 0.4–6 GHz with 200 MHz bandwidth, consisting of an 80-channel transceiver, a local oscillator (LO) unit with forty independent and one common LO, a reference unit, a digital baseband unit, and a master control unit. The emulator demonstrates excellent RF performance, achieving a phase coherence of ±2° and an error vector magnitude (EVM) of 0.65% when utilizing the common LO configuration. The path loss, modeled as a large-scale channel model, is tested at the RF level and showed strong agreement with simulation results, validating the accuracy of the channel emulation. Additionally, the end-to-end system throughput rate performance is evaluated, further confirming the feasibility and effectiveness of the proposed 80-channel MIMO channel emulator for future wireless communication applications.
- 28 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Microwaves
- Vol. 5  (3) , 640-653
Open AccessDesign and Verification of a Massive MIMO Channel Emulator for 5G/6G System Performance Testing
Channel emulator plays an essential role in 5G and 6G communication by enabling the reconstruction of wireless channels in a controlled laboratory environment. A novel massive multiple input multiple output (MIMO) channel emulator is presented in this paper for future communication. The proposed channel emulator operates at 0.4–6 GHz with 200 MHz bandwidth, consisting of an 80-channel transceiver, a local oscillator (LO) unit with forty independent and one common LO, a reference unit, a digital baseband unit, and a master control unit. The emulator demonstrates excellent RF performance, achieving a phase coherence of ±2° and an error vector magnitude (EVM) of 0.65% when utilizing the common LO configuration. The path loss, modeled as a large-scale channel model, is tested at the RF level and showed strong agreement with simulation results, validating the accuracy of the channel emulation. Additionally, the end-to-end system throughput rate performance is evaluated, further confirming the feasibility and effectiveness of the proposed 80-channel MIMO channel emulator for future wireless communication applications.
- 28 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24  (7) , 1754-1758
A Novel Channel Reconstruction Method for Multiuser Over-the-Air Testing
This letter presents a novel scheme to construct multiple wireless channels for multi-user over-the-air (OTA) testing in a limited zone without physical separation. The system model of the two devices under test (DUTs) OTA testing is provided, according to which the pre-compensation matrix is proposed to mitigate the crosstalk between the two DUTs. Experimental validation in an anechoic chamber environment demonstrates successful reconstruction of two distinct wireless channels for adjacent DUTs, achieving inter-user isolation exceeding 15 dB. The proposed scheme might be a promising option for multi-user OTA testing.
- 28 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24  (7) , 1754-1758
A Novel Channel Reconstruction Method for Multiuser Over-the-Air Testing
This letter presents a novel scheme to construct multiple wireless channels for multi-user over-the-air (OTA) testing in a limited zone without physical separation. The system model of the two devices under test (DUTs) OTA testing is provided, according to which the pre-compensation matrix is proposed to mitigate the crosstalk between the two DUTs. Experimental validation in an anechoic chamber environment demonstrates successful reconstruction of two distinct wireless channels for adjacent DUTs, achieving inter-user isolation exceeding 15 dB. The proposed scheme might be a promising option for multi-user OTA testing.
- 3 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73  (6) , 3194-3208
A 220-GHz Planar Triangular Lattice Transmitter Array With 42.7-dBm Peak EIRP for Long-Distance High-Data-Rate Wireless Communication
In this article, we develop a 220-GHz planar triangular lattice transmitter (TX) array for achieving a super high effective isotropic radiated power (EIRP), addressing the challenges associated with long-distance and high-data-rate wireless communication in the terahertz (THz) band. Due to the confliction between the electrical large size THz chips and limited space among them, only a few THz arrays operating above 200 GHz have been reported, with most of them adopting a 1-D array configuration to satisfy the $\lambda$ /2 spacing requirement. This makes it challenging to achieve a high-quality radiation beam, high EIRP, and a 2-D scalable planar array. To overcome those challenges, a 2-D triangular lattice array is proposed and derived using the array factor (AF) formula, and subsequently utilized in the design of a 4 $\times$ 4 TX array integrated with a multilayer waveguide package. Consequently, distinct advantages are obtained, including enhanced EIRP and scalability. As a proof-of-concept, a 220-GHz 4 $\times$ 4 TX array was developed and fabricated by employing hybrid technologies, including a 130 nm silicon-germanium bipolar junction transistor and the complementary metal-oxide-semiconductor transistor (SiGe BiCMOS) process, a full-metal micromachining process, and a multilayer printed circuit board (PCB) technology. Experimental results demonstrate that the developed TX array achieves a peak EIRP of 42.7 dBm with a 3-dB radio frequency (RF) and width of 40 GHz, supporting a real-time wireless communication data rate of 18 Gbps with 16-quadrature amplitude modulation (QAM) at 100 m. The proposed TX array demonstrates several advantages, including a super high EIRP, extended communication range, high data rate, low cost, high integration, and compact size, making it well-suited for the THz wireless communication systems.
- 3 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73  (6) , 3194-3208
A 220-GHz Planar Triangular Lattice Transmitter Array With 42.7-dBm Peak EIRP for Long-Distance High-Data-Rate Wireless Communication
In this article, we develop a 220-GHz planar triangular lattice transmitter (TX) array for achieving a super high effective isotropic radiated power (EIRP), addressing the challenges associated with long-distance and high-data-rate wireless communication in the terahertz (THz) band. Due to the confliction between the electrical large size THz chips and limited space among them, only a few THz arrays operating above 200 GHz have been reported, with most of them adopting a 1-D array configuration to satisfy the $\lambda$ /2 spacing requirement. This makes it challenging to achieve a high-quality radiation beam, high EIRP, and a 2-D scalable planar array. To overcome those challenges, a 2-D triangular lattice array is proposed and derived using the array factor (AF) formula, and subsequently utilized in the design of a 4 $\times$ 4 TX array integrated with a multilayer waveguide package. Consequently, distinct advantages are obtained, including enhanced EIRP and scalability. As a proof-of-concept, a 220-GHz 4 $\times$ 4 TX array was developed and fabricated by employing hybrid technologies, including a 130 nm silicon-germanium bipolar junction transistor and the complementary metal-oxide-semiconductor transistor (SiGe BiCMOS) process, a full-metal micromachining process, and a multilayer printed circuit board (PCB) technology. Experimental results demonstrate that the developed TX array achieves a peak EIRP of 42.7 dBm with a 3-dB radio frequency (RF) and width of 40 GHz, supporting a real-time wireless communication data rate of 18 Gbps with 16-quadrature amplitude modulation (QAM) at 100 m. The proposed TX array demonstrates several advantages, including a super high EIRP, extended communication range, high data rate, low cost, high integration, and compact size, making it well-suited for the THz wireless communication systems.
- 10 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73  (4) , 2086-2096
Time-Domain-Clustering Based Dynamic Channel Emulation for Millimeter-Wave MIMO Over-the-Air Testing
This paper presents a novel methodology to emulate dynamic channels within the multi-probe anechoic chamber (MPAC) framework for over-the-air (OTA) testing. The approach integrates time-domain clustering and multi-objective optimization algorithms to emulate dynamic channels precisely. Simulations and experimental validation have been provided to demonstrate the effectiveness of the proposed method, where power-angular-spectrum similarity percentage (PSP) values surpassing 87% can be consistently achieved. The time domain clustering and probe selection technique significantly contribute to the reduction of emulation complexity by compressing both temporal and spatial domains of the channel. Consequently, this strategy enhances the feasibility of system performance testing in dynamic propagation scenarios within the MPAC, and offers a novel framework for the emulation of dynamic channels in MPAC OTA testing.
- 10 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73  (4) , 2086-2096
Time-Domain-Clustering Based Dynamic Channel Emulation for Millimeter-Wave MIMO Over-the-Air Testing
This paper presents a novel methodology to emulate dynamic channels within the multi-probe anechoic chamber (MPAC) framework for over-the-air (OTA) testing. The approach integrates time-domain clustering and multi-objective optimization algorithms to emulate dynamic channels precisely. Simulations and experimental validation have been provided to demonstrate the effectiveness of the proposed method, where power-angular-spectrum similarity percentage (PSP) values surpassing 87% can be consistently achieved. The time domain clustering and probe selection technique significantly contribute to the reduction of emulation complexity by compressing both temporal and spatial domains of the channel. Consequently, this strategy enhances the feasibility of system performance testing in dynamic propagation scenarios within the MPAC, and offers a novel framework for the emulation of dynamic channels in MPAC OTA testing.
- 12 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23  (11) , 3456-3460
A Broadband Dual-Polarized ME-Dipole Antenna Array for Millimeter-Wave Applications
A magneto-electric dipole implemented using substrate integrated blocks (SIBs) is proposed for broadband dual-polarized array application. Facilitated by the SIB-based design approach, an interlaced arrangement of the perpendicular feeding probes is developed for dual-polarization excitation. While maintaining the wideband feature and single-layered antenna structure, nearly identical radiation characteristics for the two polarizations have been achieved. Additionally, the enlarged probe-to-probe distance increases the degree of design freedom for the feeding network. As a proof-of-concept, a 3 × 3 single-layered antenna array fed by single-layered dualpolarization microstrip-line feeding network is designed and fabricated at the 5G millimeter-wave frequency band. The measured results indicate that the array prototype has a wide overlapped impedance bandwidth of 36.2% covering from 21.3 to 30.7 GHz, within which a maximum gain of 14.7 dBi and a gain variation of 2 dB are maintained. The broadband performance, single-layered radiating structure, and nearly identical performance of two polarizations make the proposed design attractive for applications including 5G and beyond.
- 12 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23  (11) , 3456-3460
A Broadband Dual-Polarized ME-Dipole Antenna Array for Millimeter-Wave Applications
A magneto-electric dipole implemented using substrate integrated blocks (SIBs) is proposed for broadband dual-polarized array application. Facilitated by the SIB-based design approach, an interlaced arrangement of the perpendicular feeding probes is developed for dual-polarization excitation. While maintaining the wideband feature and single-layered antenna structure, nearly identical radiation characteristics for the two polarizations have been achieved. Additionally, the enlarged probe-to-probe distance increases the degree of design freedom for the feeding network. As a proof-of-concept, a 3 × 3 single-layered antenna array fed by single-layered dualpolarization microstrip-line feeding network is designed and fabricated at the 5G millimeter-wave frequency band. The measured results indicate that the array prototype has a wide overlapped impedance bandwidth of 36.2% covering from 21.3 to 30.7 GHz, within which a maximum gain of 14.7 dBi and a gain variation of 2 dB are maintained. The broadband performance, single-layered radiating structure, and nearly identical performance of two polarizations make the proposed design attractive for applications including 5G and beyond.
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23  (3) , 1045-1049
A 220 GHz High-Gain Low-Cost Slot Array Antenna With Integrated Fabry–Perot Cavity
This paper presents a 220 GHz planar high-gain slot array (SA) antenna with an integrated Fabry-Perot cavity (FPC). The sophisticated SA is fabricated by low-cost printed-circuit-board (PCB) technology, and a FPC structure is used to improve the gain. In contrast to the conventional FPC which requires large air gaps between feed and partial reflective surface (PRS), the proposed PRS is integrated with SA on double sides of a single substrate, resulting in a more compact and stable architecture. By using PCB and integrated FPC technology, the gain of this antenna can be 1.2 dB higher than a pure metal SA with the same scale, while the cost is much lower, and the profile increases slightly. For verification, a 220 GHz prototype is designed, fabricated and measured. The simulated peak aperture efficiency (AE) is 69%, the experiments show a peak gain of 30.1 dBi and a total efficiency (TE) of 38.3%. The 3-dB gain bandwidth is 3.2%. Compared with congener sub-THz planar antennas using low-cost fabrication methods, this antenna can remain a relatively high AE and TE under the high gain (more than 30 dBi) condition, which can be a good candidate for terahertz wireless applications.
- 14 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 23  (3) , 1045-1049
A 220 GHz High-Gain Low-Cost Slot Array Antenna With Integrated Fabry–Perot Cavity
This paper presents a 220 GHz planar high-gain slot array (SA) antenna with an integrated Fabry-Perot cavity (FPC). The sophisticated SA is fabricated by low-cost printed-circuit-board (PCB) technology, and a FPC structure is used to improve the gain. In contrast to the conventional FPC which requires large air gaps between feed and partial reflective surface (PRS), the proposed PRS is integrated with SA on double sides of a single substrate, resulting in a more compact and stable architecture. By using PCB and integrated FPC technology, the gain of this antenna can be 1.2 dB higher than a pure metal SA with the same scale, while the cost is much lower, and the profile increases slightly. For verification, a 220 GHz prototype is designed, fabricated and measured. The simulated peak aperture efficiency (AE) is 69%, the experiments show a peak gain of 30.1 dBi and a total efficiency (TE) of 38.3%. The 3-dB gain bandwidth is 3.2%. Compared with congener sub-THz planar antennas using low-cost fabrication methods, this antenna can remain a relatively high AE and TE under the high gain (more than 30 dBi) condition, which can be a good candidate for terahertz wireless applications.
- 29 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71  (10) , 4449-4458
A Trigger-Free Multi-Active-Probe Anechoic Chamber System for 5G/6G Millimeter Wave OTA Test
The multi-probe anechoic chamber (MPAC) approach is one of the most promising candidates for fifth-generation (5G)-advanced/sixth-generation (6G) massive multiple-input-multiple-output (MIMO) over-the-air (OTA) performance testing. In this article, a trigger-free multi-active-probe anechoic chamber system (MAPAC) is proposed for 5G/6G millimeter wave (mmWave) OTA test, which allocates the transmitting (Tx) and receiving (Rx) probes separately and then avoids the requirement for uplink (UL)/downlink (DL) switching signals. The system architecture is proposed, and a figure of merit for the UL/DL channel reciprocity is provided. For system design, simulations are conducted on essential items, such as the measurement distance, probe density, Tx/Rx probe spacing, etc. A novel dual-polarization active probe (AP) with independent Tx and Rx antennas is developed for the test system, which has the advantages of low loss, low cost, and high integration. The accuracy of the trigger-free mmWave MAPAC is experimentally verified by 3rd Generation Partnership Project (3GPP) clustered delay line (CDL)-A and CDL-C channels with promising application potential.
- 29 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71  (10) , 4449-4458
A Trigger-Free Multi-Active-Probe Anechoic Chamber System for 5G/6G Millimeter Wave OTA Test
The multi-probe anechoic chamber (MPAC) approach is one of the most promising candidates for fifth-generation (5G)-advanced/sixth-generation (6G) massive multiple-input-multiple-output (MIMO) over-the-air (OTA) performance testing. In this article, a trigger-free multi-active-probe anechoic chamber system (MAPAC) is proposed for 5G/6G millimeter wave (mmWave) OTA test, which allocates the transmitting (Tx) and receiving (Rx) probes separately and then avoids the requirement for uplink (UL)/downlink (DL) switching signals. The system architecture is proposed, and a figure of merit for the UL/DL channel reciprocity is provided. For system design, simulations are conducted on essential items, such as the measurement distance, probe density, Tx/Rx probe spacing, etc. A novel dual-polarization active probe (AP) with independent Tx and Rx antennas is developed for the test system, which has the advantages of low loss, low cost, and high integration. The accuracy of the trigger-free mmWave MAPAC is experimentally verified by 3rd Generation Partnership Project (3GPP) clustered delay line (CDL)-A and CDL-C channels with promising application potential.