Performance Analysis of Width and Thickness Tapered Geometries on Electrical Power Harvested from a Unimorph Piezoelectric Cantilever Beam
Authors:
- 1 May 2020
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 100-104
Abstract
This paper presents a comparative study of a thickness tapered beam (TTB) and width tapered beam (WTB) harvesters for potential vibration-based energy harvesting applications. Prior to the power output analysis, mathematical models are developed to evaluate strain distribution of the two configurations for proper implementation as substrates for unimorph harvester designs. The derived models were validated in commercial finite element analysis (FEA) software, COMSOL Multiphysics, at different dimension ratios. In addition, vibration analysis was conducted to evaluate and compare the Eigen frequency and mode shape of the geometries when coupled with piezoelectric material namely, Lead Zirconate Titanate (PZT-5H). The theoretical studies show that beam truncated in thickness direction exhibits about 18% lower resonant frequency and 6.4% (μW) higher power output than width tapered harvester with equal mass and large output impedance, respectively.Keywords
This publication has 14 references indexed in Scilit:
- Finite Element Based Modeling of a Piezolaminated Tapered Beam for Voltage GenerationProcedia Engineering, 2016
- An investigation into resonant frequency of trapezoidal V-shaped cantilever piezoelectric energy harvesterMicrosystem Technologies, 2015
- Optimal piezoelectric beam shape for single and broadband vibration energy harvesting: Modeling, simulation and experimental resultsMechanical Systems and Signal Processing, 2015
- Improving the performance of a piezoelectric energy harvester using a variable thickness beamSmart Materials and Structures, 2010
- A micro electromagnetic generator for vibration energy harvestingJournal of Micromechanics and Microengineering, 2007
- A review of power harvesting using piezoelectric materials (2003–2006)Smart Materials and Structures, 2007
- Energy harvesting vibration sources for microsystems applicationsMeasurement Science and Technology, 2006
- Generic architectures and design methods for autonomous sensorsSensors and Actuators A: Physical, 2006
- Energy Scavenging for Mobile and Wireless ElectronicsIEEE Pervasive Computing, 2005
- Improving Power Output for Vibration-Based Energy ScavengersIEEE Pervasive Computing, 2005