Umer Sharif
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Umer Sharif has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
Dauda Sh. Ibrahim
Southeast University
9 shared publications- Beibei Sun
Southeast University
7 shared publications Orelaja Adewale Oluseyi
School of Mechanical Engineering, Southeast University, Nanjing, People’s Republic of China
4 shared publicationsOrelaja Oluseyi Adewale
School of Mechanical Engineering, Southeast University, Nanjing Jiangsu, 211189, People’s Republic of China
3 shared publicationsTianzheng Zhao
School of Mechanical Engineering, Southeast University, Nanjing, China
3 shared publicationsAleena Zafar
Southeast University
2 shared publications
Latest Publications
- 18 March 2022
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (5) , 055004
An experimental study on dynamic behaviour of a sandwich beam with 3D printed hexagonal honeycomb core filled with magnetorheological elastomer (MRE)
Sandwich beams with an aluminium face sheet and a magnetorheological elastomer (MRE) of varying proportions of elastomer and magnetic particles (weight to weight)% filled in a honeycomb core of Nylon and Resin8000 are manufactured and experimentally analysed in this study. To evaluate the dynamic properties of sandwich beams, manufactured structures subjected to sine sweep and classic shock tests and assessed both with and without magnetic field of varying intensities applied on the free end of the beam. The experimental results demonstrated good performance in vibration level attenuation, particularly in the structure’s primary vibration mode under consideration. The magnetic field applied was capable of lowering the first natural frequency of the proposed sandwich beam structures. Experiment results showed that an increase in an induced magnetic field shifted the natural frequencies, vibration amplitude, and damping ratio of sandwich panels with MRE honeycomb core.
- 18 March 2022
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 31 (5) , 055004
An experimental study on dynamic behaviour of a sandwich beam with 3D printed hexagonal honeycomb core filled with magnetorheological elastomer (MRE)
Sandwich beams with an aluminium face sheet and a magnetorheological elastomer (MRE) of varying proportions of elastomer and magnetic particles (weight to weight)% filled in a honeycomb core of Nylon and Resin8000 are manufactured and experimentally analysed in this study. To evaluate the dynamic properties of sandwich beams, manufactured structures subjected to sine sweep and classic shock tests and assessed both with and without magnetic field of varying intensities applied on the free end of the beam. The experimental results demonstrated good performance in vibration level attenuation, particularly in the structure’s primary vibration mode under consideration. The magnetic field applied was capable of lowering the first natural frequency of the proposed sandwich beam structures. Experiment results showed that an increase in an induced magnetic field shifted the natural frequencies, vibration amplitude, and damping ratio of sandwich panels with MRE honeycomb core.
- Open Access
Dynamic Behavior of Sandwich Structures with Magnetorheological Elastomer: A Review
Magnetorheological (MR) materials are classified as smart materials that can alter their rheological features once exposed to peripheral magnetic fields. MR materials have been a standard and one of the primary smart materials for the last few decades due to their outstanding vibration control performance in adaptive sandwich structures and systems. This paper reviews the vibration suppression investigations of flexible constructions using MR elastomers (MREs). In relations of field-dependent controllability, physical features such as stiffness and the damping of different geometrical structures integrated with the core layer of MREs are explored. The veracity of the knowledge is discussed in this article, whereby sandwich structures with different MR treatment configurations are analyzed for free and forced vibration, MRE sandwich structures are analyzed for stability under different working conditions, and the optimal positions of fully and partially treated MRE sandwich structures for improved vibration control are identified. MR materials′ field-dependent stiffness and damping characteristics are also discussed in this article. A few of the most noteworthy research articles over the last several years have been summarized.
Open AccessDynamic Behavior of Sandwich Structures with Magnetorheological Elastomer: A Review
Magnetorheological (MR) materials are classified as smart materials that can alter their rheological features once exposed to peripheral magnetic fields. MR materials have been a standard and one of the primary smart materials for the last few decades due to their outstanding vibration control performance in adaptive sandwich structures and systems. This paper reviews the vibration suppression investigations of flexible constructions using MR elastomers (MREs). In relations of field-dependent controllability, physical features such as stiffness and the damping of different geometrical structures integrated with the core layer of MREs are explored. The veracity of the knowledge is discussed in this article, whereby sandwich structures with different MR treatment configurations are analyzed for free and forced vibration, MRE sandwich structures are analyzed for stability under different working conditions, and the optimal positions of fully and partially treated MRE sandwich structures for improved vibration control are identified. MR materials′ field-dependent stiffness and damping characteristics are also discussed in this article. A few of the most noteworthy research articles over the last several years have been summarized.
- 18 October 2021
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1047, 31-38
Dynamic Behavior Analysis of the Sandwich Beam Structure with Magnetorheological Honeycomb Core under Different Magnetic Intensities: A Numerical Approach
In this article a sandwich beam structure with honeycomb core filled of MRE (magnetorheological elastomer) with different ratios of Elastomer and iron particles is proposed. Modal response for structures with Nylon and Resin8000 honeycomb core filled with MRE and sandwiched between aluminum face sheets were analyzed and compared for two different ratios of MRE by placing magnets at free end and center of the structure. The force generated by magnets on the sandwich beam structure was calculated using ANSYS EDT and the modal response of the structure was then observed under generated magnetic force using ANSYS Workbench. The results showed that the resonance frequency of the structure decreased as the magnetic intensity was increased for all the cases specially for the first mode. Secondly structure with Nylon honeycomb core showed lower frequency drop and higher deformation than the structure with Resin8000 honeycomb core.
- 18 October 2021
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 1047, 31-38
Dynamic Behavior Analysis of the Sandwich Beam Structure with Magnetorheological Honeycomb Core under Different Magnetic Intensities: A Numerical Approach
In this article a sandwich beam structure with honeycomb core filled of MRE (magnetorheological elastomer) with different ratios of Elastomer and iron particles is proposed. Modal response for structures with Nylon and Resin8000 honeycomb core filled with MRE and sandwiched between aluminum face sheets were analyzed and compared for two different ratios of MRE by placing magnets at free end and center of the structure. The force generated by magnets on the sandwich beam structure was calculated using ANSYS EDT and the modal response of the structure was then observed under generated magnetic force using ANSYS Workbench. The results showed that the resonance frequency of the structure decreased as the magnetic intensity was increased for all the cases specially for the first mode. Secondly structure with Nylon honeycomb core showed lower frequency drop and higher deformation than the structure with Resin8000 honeycomb core.
- Open Access
Fracture Toughness Analysis of Aluminum (Al) Foil and Its Adhesion with Low-Density Polyethylene (LPDE) in the Packing Industry
Liquid food packages consist of various polymers films, which are bonded together with Aluminum foil (Al-foil) using adhesion or by direct heat. The main aim of this research was to define important material properties such as fracture toughness and some FE-simulation material model parameters such as damage initiation, damage evolution, and the adhesion between Al-foil and low-density polyethylene (LDPE) film. This investigation is based on both physical experiments and FE simulations in ABAQUS with and without initial cracks of different lengths for comparison purposes. The final FE model in ABAQUS was used to compare the numerical input parameters in an extensive study with the ambition to investigate the materials’ parameters in cases with or without adhesion between laminates. Finally, the relation between the theoretical and experimental results for Al-foil using linear elastic fracture mechanics and modified strip yield model were shown, and the fracture toughness was calculated for two different thicknesses of Al-foil.
Open AccessFracture Toughness Analysis of Aluminum (Al) Foil and Its Adhesion with Low-Density Polyethylene (LPDE) in the Packing Industry
Liquid food packages consist of various polymers films, which are bonded together with Aluminum foil (Al-foil) using adhesion or by direct heat. The main aim of this research was to define important material properties such as fracture toughness and some FE-simulation material model parameters such as damage initiation, damage evolution, and the adhesion between Al-foil and low-density polyethylene (LDPE) film. This investigation is based on both physical experiments and FE simulations in ABAQUS with and without initial cracks of different lengths for comparison purposes. The final FE model in ABAQUS was used to compare the numerical input parameters in an extensive study with the ambition to investigate the materials’ parameters in cases with or without adhesion between laminates. Finally, the relation between the theoretical and experimental results for Al-foil using linear elastic fracture mechanics and modified strip yield model were shown, and the fracture toughness was calculated for two different thicknesses of Al-foil.
- 2 August 2021
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (26) , 5488-5500
Nonlinear dynamic analysis of a reciprocative magnetic coupling on performance of piezoelectric energy harvester interfaced with DC circuit
In this article, a nonlinear piezoelectric harvester coupled with a standard rectifying circuit is developed. Contrary to traditional Duffing-type magnetic harvester mechanism, the nonlinear effect in the system is induced by a dynamic tipmass with embedded magnet. Further, dynamic equation of the system is derived and subsequently, its equivalent circuit model is devised to evaluate its performance with a conventional harvester. Simulation and experimental results exhibit that the nonlinear effect due to the force coupling has a profound effect on peak output power and operational bandwidth of the harvester as compared to linear system with DC interface circuit.
- 2 August 2021
- Published by Taylor & Francis in Mechanics of Advanced Materials and Structures
- Vol. 29 (26) , 5488-5500
Nonlinear dynamic analysis of a reciprocative magnetic coupling on performance of piezoelectric energy harvester interfaced with DC circuit
In this article, a nonlinear piezoelectric harvester coupled with a standard rectifying circuit is developed. Contrary to traditional Duffing-type magnetic harvester mechanism, the nonlinear effect in the system is induced by a dynamic tipmass with embedded magnet. Further, dynamic equation of the system is derived and subsequently, its equivalent circuit model is devised to evaluate its performance with a conventional harvester. Simulation and experimental results exhibit that the nonlinear effect due to the force coupling has a profound effect on peak output power and operational bandwidth of the harvester as compared to linear system with DC interface circuit.
- 17 May 2021
- Published by Springer Nature in Microsystem Technologies
- Vol. 27 (12) , 4253-4268
Numerical and experimental study of a gauge-shaped beam for improved performance of piezoelectric energy harvester
- 17 May 2021
- Published by Springer Nature in Microsystem Technologies
- Vol. 27 (12) , 4253-4268
Numerical and experimental study of a gauge-shaped beam for improved performance of piezoelectric energy harvester
- 25 March 2021
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 51 (5) , 2435-2457
Optimal strain-deflection analyses of a wedge edged beam for enhanced vibration energy scavenging in patch-like harvester
Recently, non-prismatic beams have been considered as perfect substitutes to replace uniform cantilever beam structures in harvester design. This is due to their tendencies to provide uniform strain distribution, which enhances piezoelectric (PZT) charge generation when coupled with the beams. As the voltage produced by the PZT depends largely on the geometrical shape of the substrate, thus there is need for formulations to analyze the behavior of the shim prior to practical implementation. In this paper, analytical and finite element models were developed to study deflection and strain distribution of a non-prismatic beam termed, wedge edged cantilever (WEC) for patch-like harvester application. The analyses offer possibility for maximum utilization of strain location along the beam span for efficient harvester design. Vibration energy harvesting characteristics of the WEC beam with partially covered PZT material forming three configurations namely: Config1, Config2 and Config3 were studied. Both numerical and experimental results show that Confg3 with macro fiber composite (MFC) as the PZT material covering the determined optimal strain position yielded 2 to 3 times more peak output voltage than Config1 and Config2 with the MFC bonded at non-optimal positions.
- 25 March 2021
- Published by Taylor & Francis in Mechanics Based Design of Structures and Machines
- Vol. 51 (5) , 2435-2457
Optimal strain-deflection analyses of a wedge edged beam for enhanced vibration energy scavenging in patch-like harvester
Recently, non-prismatic beams have been considered as perfect substitutes to replace uniform cantilever beam structures in harvester design. This is due to their tendencies to provide uniform strain distribution, which enhances piezoelectric (PZT) charge generation when coupled with the beams. As the voltage produced by the PZT depends largely on the geometrical shape of the substrate, thus there is need for formulations to analyze the behavior of the shim prior to practical implementation. In this paper, analytical and finite element models were developed to study deflection and strain distribution of a non-prismatic beam termed, wedge edged cantilever (WEC) for patch-like harvester application. The analyses offer possibility for maximum utilization of strain location along the beam span for efficient harvester design. Vibration energy harvesting characteristics of the WEC beam with partially covered PZT material forming three configurations namely: Config1, Config2 and Config3 were studied. Both numerical and experimental results show that Confg3 with macro fiber composite (MFC) as the PZT material covering the determined optimal strain position yielded 2 to 3 times more peak output voltage than Config1 and Config2 with the MFC bonded at non-optimal positions.
- Open Access
- 19 October 2020
- Published by Wiley in Journal of Healthcare Engineering
- Vol. 2020, 1-12
Comparative Analysis of Cutting Forces, Torques, and Vibration in Drilling of Bovine, Porcine, and Artificial Femur Bone with Considerations for Robot Effector Stiffness
Bone drilling is known as one of the most sensitive milling processes in biomedical engineering field. Fracture behavior of this cortical bone during drilling has attracted the attention of many researchers; however, there are still impending concerns such as necrosis, tool breakage, and microcracks due to high cutting forces, torques, and high vibration while drilling. This paper presents a comparative analysis of the cutting forces, torques, and vibration resulted on different bone samples (bovine, porcine, and artificial femur) using a 6dof Robot arm effector with considerations of its stiffness effects. Experiments were conducted on two spindle speeds of 1000 and 1500 rpm with a drill bit diameter of 2.5 mm and 6 mm depth of cut. The results obtained from the specimens were processed and analyzed using MATLAB R2015b and Visio 2000 software; these results were then compared with a prior test using manual and conventional drilling methods. The results obtained show that there is a significant drop in the average values of maximum drilling force for all the bone specimens when the spindle speed changes from 1000 rev/min to 1500 rev/min, with a drop from (20.07 to 12.34 N), approximately 23.85% for bovine, (11.25 to 8.14 N) with 16.03% for porcine, and (5.62 to 3.86 N) with 33.99% for artificial femur. The maximum average values of torque also decrease from 41.2 to 24.2 N·mm (bovine), 37.0 to 21.6 N·mm (porcine), and 13.6 to 6.7 N·mm (artificial femur), respectively. At an increase in the spindle speed, the vibration amplitude on all the bone samples also increases considerably. The variation in drilling force, torque, and vibration in our result also confirm that the stiffness of the robot effector joint has negative effect on the bone precision during drilling process.
- 19 October 2020
- Published by Wiley in Journal of Healthcare Engineering
- Vol. 2020, 1-12
Open AccessComparative Analysis of Cutting Forces, Torques, and Vibration in Drilling of Bovine, Porcine, and Artificial Femur Bone with Considerations for Robot Effector Stiffness
Bone drilling is known as one of the most sensitive milling processes in biomedical engineering field. Fracture behavior of this cortical bone during drilling has attracted the attention of many researchers; however, there are still impending concerns such as necrosis, tool breakage, and microcracks due to high cutting forces, torques, and high vibration while drilling. This paper presents a comparative analysis of the cutting forces, torques, and vibration resulted on different bone samples (bovine, porcine, and artificial femur) using a 6dof Robot arm effector with considerations of its stiffness effects. Experiments were conducted on two spindle speeds of 1000 and 1500 rpm with a drill bit diameter of 2.5 mm and 6 mm depth of cut. The results obtained from the specimens were processed and analyzed using MATLAB R2015b and Visio 2000 software; these results were then compared with a prior test using manual and conventional drilling methods. The results obtained show that there is a significant drop in the average values of maximum drilling force for all the bone specimens when the spindle speed changes from 1000 rev/min to 1500 rev/min, with a drop from (20.07 to 12.34 N), approximately 23.85% for bovine, (11.25 to 8.14 N) with 16.03% for porcine, and (5.62 to 3.86 N) with 33.99% for artificial femur. The maximum average values of torque also decrease from 41.2 to 24.2 N·mm (bovine), 37.0 to 21.6 N·mm (porcine), and 13.6 to 6.7 N·mm (artificial femur), respectively. At an increase in the spindle speed, the vibration amplitude on all the bone samples also increases considerably. The variation in drilling force, torque, and vibration in our result also confirm that the stiffness of the robot effector joint has negative effect on the bone precision during drilling process.
- 1 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 19-23
Static and Modal Analysis of Sandwich Beam Structure with Magnetorheological Honeycomb Core
In this article a sandwich beam structure with honeycomb core filled of MRE (magnetorheological elastomer) with different ratios of Elastomer and iron particles modeled in ANSYS is proposed. The simulation (resonance frequency, total deformation, equivalent stress and equivalent strain) results for structures with PLA (Polylactic acid) and ABS (Acrylonitrile butadiene styrene) honeycomb core were analyzed and compared for two different cases. The results showed that the resonance frequency of the structure decreased as the ratio of iron particles was increased for all the cases, this is due to the increase in stiffness of the structure due to higher ratio of iron particles. Secondly structure with ABS honeycomb core showed lower frequency and higher deformation than the structure with PLA honeycomb core.
- 1 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 19-23
Static and Modal Analysis of Sandwich Beam Structure with Magnetorheological Honeycomb Core
In this article a sandwich beam structure with honeycomb core filled of MRE (magnetorheological elastomer) with different ratios of Elastomer and iron particles modeled in ANSYS is proposed. The simulation (resonance frequency, total deformation, equivalent stress and equivalent strain) results for structures with PLA (Polylactic acid) and ABS (Acrylonitrile butadiene styrene) honeycomb core were analyzed and compared for two different cases. The results showed that the resonance frequency of the structure decreased as the ratio of iron particles was increased for all the cases, this is due to the increase in stiffness of the structure due to higher ratio of iron particles. Secondly structure with ABS honeycomb core showed lower frequency and higher deformation than the structure with PLA honeycomb core.
- 1 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 100-104
Performance Analysis of Width and Thickness Tapered Geometries on Electrical Power Harvested from a Unimorph Piezoelectric Cantilever Beam
This paper presents a comparative study of a thickness tapered beam (TTB) and width tapered beam (WTB) harvesters for potential vibration-based energy harvesting applications. Prior to the power output analysis, mathematical models are developed to evaluate strain distribution of the two configurations for proper implementation as substrates for unimorph harvester designs. The derived models were validated in commercial finite element analysis (FEA) software, COMSOL Multiphysics, at different dimension ratios. In addition, vibration analysis was conducted to evaluate and compare the Eigen frequency and mode shape of the geometries when coupled with piezoelectric material namely, Lead Zirconate Titanate (PZT-5H). The theoretical studies show that beam truncated in thickness direction exhibits about 18% lower resonant frequency and 6.4% (μW) higher power output than width tapered harvester with equal mass and large output impedance, respectively.
- 1 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 100-104
Performance Analysis of Width and Thickness Tapered Geometries on Electrical Power Harvested from a Unimorph Piezoelectric Cantilever Beam
This paper presents a comparative study of a thickness tapered beam (TTB) and width tapered beam (WTB) harvesters for potential vibration-based energy harvesting applications. Prior to the power output analysis, mathematical models are developed to evaluate strain distribution of the two configurations for proper implementation as substrates for unimorph harvester designs. The derived models were validated in commercial finite element analysis (FEA) software, COMSOL Multiphysics, at different dimension ratios. In addition, vibration analysis was conducted to evaluate and compare the Eigen frequency and mode shape of the geometries when coupled with piezoelectric material namely, Lead Zirconate Titanate (PZT-5H). The theoretical studies show that beam truncated in thickness direction exhibits about 18% lower resonant frequency and 6.4% (μW) higher power output than width tapered harvester with equal mass and large output impedance, respectively.