Experimental Characterization of the Properties of Double-Lap Needled and Hybrid Joints of Carbon/Epoxy Composites
Open Access
- 11 November 2015
- Vol. 8 (11) , 7578-7586
Abstract
The effect of through-thickness reinforcement by thin 1 mm steel needles (z-pins) on the static tensile strength of double-lap joints of a carbon/epoxy composite was investigated. Two types of joints—z-pinned and hybrid (including glued ones)—were considered. The joints were reinforced in the overlap region with 9, 25, or 36 z-pins. Comparing mechanical properties of the double-lap joints with the corresponding characteristics of their unpinned counterparts, the z-pins were found to be highly effective: the strength and stiffness of the pinned joints increased up to 300% and 280%, respectively. These improvements were due to a transition in the failure mechanism from debonding of the joint in the absence of z-pins to pullout or shear rupture of z-pins or to the tensile failure of laminate adherends, depending on the volume content of the pins.Keywords
Funding Information
- European Social Fund Research Project No. 2013/0019/1DP/1.1.1.2.0/13/APIA/VIAA/062
This publication has 16 references indexed in Scilit:
- Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tensionComposites Science and Technology, 2006
- Analysis of the fracture behaviour of a stitched single-lap jointComposites Part A: Applied Science and Manufacturing, 2005
- Effect of Stitching on the Static and Fatigue Performance of Co-Cured Composite Single-Lap JointsJournal of Composite Materials, 2004
- Mixed mode delamination of polymer composite laminates reinforced through the thickness by z-fibersComposites Part A: Applied Science and Manufacturing, 2002
- Strength of RTM Single Lap Joints with Transverse StitchingKey Engineering Materials, 1997
- Analysis of adhesive bonded composite lap joints with transverse stitchingApplied Composite Materials, 1996
- Tensile Strength of Stitching Joint in Woven Glass FabricsJournal of Engineering Materials and Technology, 1990
- Effect of stitching on the strength of bonded composite single lap jointsAIAA Journal, 1985
- Approximate Stresses in an Orthotropic Plate Containing a Circular HoleJournal of Composite Materials, 1975
- Stress Fracture Criteria for Laminated Composites Containing Stress ConcentrationsJournal of Composite Materials, 1974