Precise sinusoidal signal extraction from noisy waveform in vibration calibration
- 26 May 2022
- journal article
- research article
- Published by IOP Publishing in Metrologia
- Vol. 59 (3) , 035010
Abstract
Precise extraction of sinusoidal vibration parameters is essential for the dynamic calibration of vibration sensors, such as accelerometers. However, several standard methods have not yet been optimized for large background noise. In this work, signal processing methods to extract small vibration signals from noisy data in the case of accelerometer calibration are discussed. The results show that spectral leakage degrades calibration accuracy. Three methods based on the use of a filter, window function, and numerical differentiation are investigated to reduce the contribution of the calibration system noise. We demonstrate the effectiveness of these methods with theoretical calculations, simulations, and experiments. The uncertainty of microvibration calibration in the National Metrology Institute of Japan is reduced by two orders of magnitudes using the proposed methods. We recommend to use a combination of numerical differentiation and either a time-domain window function or a bandpass filter for most accelerometer microvibration sensitivity calibrations. For suppressing the effects of line noise, adjusting the data set length is also effective.Keywords
All Related Versions
This publication has 10 references indexed in Scilit:
- Vibration measurement without the Heydemann correctionMeasurement: Sensors, 2021
- A low-acceleration measurement using anti-vibration table with low-frequency resonanceACTA IMEKO, 2020
- Digital signal processsing functions for ultra-low frequency calibrationsACTA IMEKO, 2020
- Micromachined Accelerometers with Sub-µg/√Hz Noise Floor: A ReviewSensors, 2020
- Design of Perforated Membrane for Low-Noise Capacitive MEMS AccelerometersIEEE Sensors Journal, 2019
- Final report of CCAUV.V-K3: key comparison in the field of acceleration on the complex charge sensitivityMetrologia, 2017
- Microelectromechanical Systems-Based Electrochemical Seismic Sensors With Insulating Spacers Integrated Electrodes for Planetary ExplorationIEEE Sensors Journal, 2015
- Final report on CIPM key comparison CCAUV.V-K2Metrologia, 2014
- Structural health monitoring of civil infrastructurePhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2006
- Methods for the calibration of vibration pick-ups by laser interferometry: I. Theoretical analysisMeasurement Science and Technology, 1998