Tensile and fatigue testing of Inconel 617 alloy after heat treatment and electrochemical tests
Authors:
- B.S. YilbasBYB.S. Yilbas
- M.S.J. HashmiMHM.S.J. Hashmi
- 1 June 2001
- journal article
- review article
- Published by Emerald Publishing in Industrial Lubrication and Tribology
- Vol. 53 (3) , 112-118
Abstract
Inconel 617 alloy is widely used in industry due to its superior high temperature properties. After long periods of operation, the alloy microstructure changes. One of the methods to regain the alloy microstructure is heat treatment at elevated temperatures. In the present study, electrochemical and mechanical responses of Inconel 617 alloy over 30,000 hours of operation as a transition‐piece in agas turbine engine are examined. The heat treatment process at two different temperature levels is applied when refurbishing the alloy microstructure. The electrochemical tests are conducted to investigate the corrosion response of the alloy before and after the heat treatment process. Fatigue and tensile tests are carried out for the workpieces subjected to the electrochemical tests. SEM is introduced to examine the fractured surfaces.Keywords
This publication has 9 references indexed in Scilit:
- The effect of structural evolution in INCONEL 601 on intergranular corrosionMaterials Chemistry and Physics, 1998
- Seawater corrosion behavior of laser surface modified Inconel 625 alloyMaterials Science and Engineering: A, 1996
- Evaluation of Gas Turbine Transitions After 20,000 and 37,000 Hours of Service1992
- Pitting Corrosion of Inconel 600 in Chloride and Thiosulfate Anion Solutions at Low TemperatureCorrosion, 1992
- Effect of Thermal and Mechanical History on the Creep Rate of Inconel 617Transactions of the Iron and Steel Institute of Japan, 1980
- Morphological changes of carbides during creep and their effects on the creep properties of inconel 617 at 1000 °CMetallurgical Transactions A, 1980
- Effect of Grain Boundary Migration and Recrystallization on the Creep Strength of Inconel 617Transactions of the Iron and Steel Institute of Japan, 1978
- Effects of thermal aging on the microstructure and mechanical properties of a commercial Ni-Cr-Co-Mo alloy (inconel 617)Metallurgical Transactions A, 1976
- Microstructure and phase stability of INCONEL alloy 617Metallurgical Transactions, 1974