The influence of flow admixtures to the electromagnetic flow meter accuracy
Open Access
- 13 February 2024
- book chapter
- Published by IntechOpen
Abstract
The measurement error appears in an electromagnetic flow meter when the flow has admixtures with magnetic and/or electric properties different from the fluid. The particle shape approximates the ellipsoid. The reasons of error appeared inside and outside of the particles in the active zone of the flow meter with any canal form and turbulent flow investigated. The investigation is performed by analogy among electrostatic, magnetic, and electric current fields. Expressions for error depending on volume concentration, permeability, electric conductivity of particles, and different ellipsoid axes lengths are presented. The expressions of the error are obtained assuming that particles are oriented in various directions concerning the flow direction. Magnetic particles with the considerable value of electric conductivity are dangerous in particular. The extra measurement error depends on particle shape in this case especially. The measurement error increases if the particle shape differs from the sphere. The complementary measurement error can exceed some hundred times the volume concentration of particles if the ratio between the longest and shortest axes of the ellipsoid exceeds 10. The error is proportional to the second power of admixtures volume concentration when particles are nonmagnetic. When admixtures are nonmagnetic and nonconductive, the measurement error does not depend on the particle’s shape.Keywords
This publication has 11 references indexed in Scilit:
- The Influence of Admixtures to the Signal of an Electromagnetic Flow MeterEnergies, 2019
- A two-phase flow meter for determining water and solids volumetric flow rates in stratified, inclined solids-in-water flowsFlow Measurement and Instrumentation, 2015
- Influence of Non-Magnetic Admixtures to the Signal of Electromagnetic Flow MeterElektronika ir Elektrotechnika, 2011
- On the concept of virtual current as a means to enhance verification of electromagnetic flowmetersMeasurement Science and Technology, 2011
- Flow measurement with an electromagnetic flowmeter in two-phase bubbly and slug flow regimesFlow Measurement and Instrumentation, 2002
- Errors in electromagnetic flow meter with magnetic particlesFlow Measurement and Instrumentation, 2001
- Use of the electromagnetic flowmeter in a two-phase flowInternational Journal of Multiphase Flow, 1983
- The predicted effects of red blood cells on electromagnetic flowmeter sensitivityJournal of Physics D: Applied Physics, 1971
- The theory of induced voltage electromagnetic flowmetersJournal of Fluid Mechanics, 1970
- Relation between the Velocity Profile and the Sensitivity of Electromagnetic FlowmetersJournal of Applied Physics, 1954