Evaluation of Hydrogen Permeation into High-Strength Steel during Corrosion in Different Marine Corrosion Zones
Open Access
- 9 March 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (6) , 2785
Abstract
Hydrogen permeation into high-strength steel during the corrosion process can deteriorate their mechanical properties, thus seriously threatening the safety of steel structures. However, the hydrogen permeation behavior of steels in corrosive marine environments is not well understood. In this study, the hydrogen permeation behavior and mechanism of AISI 4135 steel in different marine corrosion zones was investigated for the first time using an in situ hydrogen permeation monitoring system via outdoor and indoor tests. The three-month outdoor hydrogen permeation test showed that the diffusible hydrogen content of the steels exposed to the marine atmospheric, splash, tidal and immersion zone was 3.15 × 10−3, 7.00 × 10−2, 2.06 × 10−2 and 3.33 × 10−2 wt ppm, respectively. Meanwhile, results showed that the hydrogen permeation current density was positively correlated with the corrosion rate of the steel in the marine environments. This research is of great significance for guiding the safe application of high-strength steel in the marine environments.Keywords
Funding Information
- National Natural Science Foundation of China (41976033)
This publication has 68 references indexed in Scilit:
- Electrochemical formation of green rusts in deaerated seawater-like solutionsElectrochimica Acta, 2011
- The effect of biofouling on localized corrosion of the stainless steels N08904 and UNS S32760International Biodeterioration & Biodegradation, 2009
- The hydrogen permeation investigation of API X56 steel in sea mudMaterials and Corrosion, 2007
- The influence of macrofouling on the corrosion behaviour of API 5L X65 carbon steelBiofouling, 2007
- Environmental Factors Affecting Hydrogen Entry into High Strength Steel due to Atmospheric CorrosionMATERIALS TRANSACTIONS, 2006
- Effect of hydrogen and stress concentration on the notch tensile strength of AISI 4135 steelMaterials Science and Engineering: A, 2005
- Hydrogen Entry into Steel by Atmospheric CorrosionISIJ International, 2003
- Hydrogen permeation studied by electrochemical techniquesElectrochimica Acta, 1999
- Hydrogen Embrittlement of Cathodically Protected High-Strength, Low-Alloy Steels Exposed to Sulfate-Reducing BacteriaCorrosion, 1994
- The adsorption and diffusion of electrolytic hydrogen in palladiumProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1962