Effect of Loading Rate and Tempering Temperature on Fracture Toughness of Hydrogen-Charged Low Alloy Steel SCM440
Authors:
Open Access
- 1 January 2011
- journal article
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
- Vol. 77 (775) , 483-494
Abstract
J - R curves under continuous hydrogen charge were obtained to evaluate the effect of absorbed hydrogen on fracture toughness of SCM440 low alloy steel. The effect of absorbed hydrogen, loading rate and tempering temperature were investigated. Five materials which were tempered at different temperature to change Vickers hardness were used. Continuous hydrogen charge, which isolated the crack tip from the electrolyte and kept the crack in dry condition, was conducted during the test. Material hardness and loading rate significantly affected J - R curves and JIC. Low loading rate and high hardness resulted in drastically decreased JIC. The materials which were tempered at 803K showed 90% reduction of JIC compared with that of uncharged specimen. The significant reduction was experienced in materials with Vickers hardness higher than 310. Quasi-cleavage fracture surface was predominantly observed in the tests which resulted in low JIC. It is indicated that the hardness of low alloy steel used as a structural material should be limited below 300 on the viewpoint of fracture toughness. This study showed that low loading test that lasts for eighty hours at least is necessary to assess the JIC of hydrogen charged material.Keywords
This publication has 12 references indexed in Scilit:
- Study on Crack Opening Displacement and Hydrogen Enhanced Cruck Propagation of Low Alloy SteelTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2010
- Effects of Hydrogen Concentration, Specimen Thickness, Loading Frequency and Temperature on the Hydrogen Enhanced Crack Propagation of Low Alloy SteelTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2010
- Effect of Absorbed Hydrogen on the Near Threshold Fatigue Crack Growth Behavior of Short Crack (Examination on Low Alloy Steel, Carbon Steel and Heat Resistant Alloy A286)TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2008
- Effect of Hydrogen and Frequency on Fatigue Behavior of SCM435 Steel for Storage Cylinder of Hydrogen StationTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 2007
- Effect of Hydrogen on the Tensile Properties of 900-MPa-Class JIS-SCM435 Low-Alloy-Steel for Use in Storage Cylinder of Hydrogen StationJournal of the Japan Institute of Metals and Materials, 2006
- Hydrogen Environment Embrittlement of SCM440 Steel in High-pressure Hydrogen at Room TemperatureJournal of the Japan Institute of Metals and Materials, 2005
- Mechanism of Hydrogen Embrittlement in Iron and Low Strength Steels.Materia Japan, 1994
- Role of Quasi-Cleavage/Intergranular Fracture on the Hydrogen Embrittled Cracking Process.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1993
- Environmentally assisted cracking: Overview of evidence for an adsorption-induced localised-slip processActa Metallurgica, 1988
- On the influence of environment on the load ratio dependence of fatigue thresholds in pressure vessel steelEngineering Fracture Mechanics, 1983