Comparison of numerical simulation models for predicting temperature in solidification analysis with reference to air gap formation
Authors:
- J. KronJKJ. Kron
- M. BelletMBM. Bellet
- A. LudwigALA. Ludwig
- B. PustalBPB. Pustal
- J. WendtJWJ. Wendt
- H. FredrikssonHFH. Fredriksson
- 1 October 2004
- journal article
- Published by Maney Publishing in International Journal of Cast Metals Research
- Vol. 17 (5) , 295-310
Abstract
International audienceAs a result of its influence on heat transfer between cast part and mould, air gap formation is an important problem for many casting processes. The general explanation for gap formation is that, as a result of stresses and distortions that are created from inhomogeneous cooling, shrinkage of the casting and expansion of the mould occur. In this paper, different thermomechanical approaches are applied to a well defined casting process using three commercial and one inhouse codes and their predictions are compared with experimental findings. The experimental data were obtained from the solidification and subsequent cooling of cylindrical castings of eutectic Al-13%Si and ternary Al-7%Si-0.3%Mg alloys. Based on these findings, the major differences between the predictions of the models and the actual formation of the air gap are discusseKeywords
This publication has 12 references indexed in Scilit:
- Air gap formation during solidification in cylindrical castings of pure aluminium and eutectic Al-SiInternational Journal of Cast Metals Research, 2002
- The heat-transfer coefficient during the unidirectional solidification of an Al-Si alloy castingMetallurgical and Materials Transactions B, 1999
- The Implementation of a Mathematical Model to Characterize Mold Metal Interface Effects in Metal CastingCanadian Metallurgical Quarterly, 1998
- The movement of the concave casting surface during mushy-type solidification and its effect on the heat-transfer coefficientMetallurgical and Materials Transactions B, 1998
- Thermomechanics of the cooling stage in casting processes: Three-dimensional finite element analysis and experimental validationMetallurgical and Materials Transactions B, 1996
- An augmented lagrangian treatment of contact problems involving frictionComputers & Structures, 1992
- The air-gap formation process at the casting-mold interface and the heat transfer mechanism through the gapMetallurgical Transactions B, 1986
- Metal-Mold interfacial heat transferMetallurgical Transactions B, 1985
- Theory of thermal stresses and air-gap formation during the early stages of solidification in a rectangular moldJournal of the Mechanics and Physics of Solids, 1971
- Fundamental Problems in Viscoplasticity1966