Aerodynamic Performance of a Coolant Flow Off-Take Downstream of an Outlet Guide Vane
Authors:
- 18 October 2012
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 135 (1) , 011006
Abstract
Within the compression system of a gas turbine engine a significant amount of air is removed to fulfill various requirements associated with cooling, ventilation, and sealing. Flow is usually removed through off-takes located in regions where space is restricted, while the flow is highly complex containing blade wakes, secondary flows, and other flow features. This paper investigates the performance of a pitot style off-take aimed at providing a high pressure recovery in a relatively short length. For this to be achieved some prediffusion of the flow is required upstream of the off-take (i.e., by making the off-take larger than the captured streamtube). Although applicable to a variety of applications, the system is targeted at an intercooled aero-engine concept where the off-take would be located aft of the fan outlet guide vane (OGV) root and provide coolant flow to the heat exchangers. Measurements and numerical predictions are initially presented for a baseline configuration with no off-take present. This enabled the OGV near field region to be characterized and provided a datum, relative to which the effects of introducing an off-take could be assessed. With the off-take present a variety of configurations were investigated including different levels of prediffusion, prior to the off-take, and different off-take positions. For very compact systems of short length, such that the gap between the OGV and off-take is relatively small, the amount of prediffusion achievable is limited by the off-take pressure field and its impact on the upstream OGV row. This pressure field is also influenced by parameters such as the nondimensional off-take height and splitter thickness. The paper analyses the relative importance of these various effects in order to provide some preliminary design rules. For systems of increased length a significant amount of flow prediffusion can be achieved with little performance penalty. However, the prediffusion level is eventually limited by the increased distortion and pressure losses associated with the captured streamtube.Keywords
This publication has 8 references indexed in Scilit:
- Experimental and Computational Study of Hybrid Diffusers for Gas Turbine CombustorsJournal of Engineering for Gas Turbines and Power, 2004
- Aerodynamic Design and Performance of Aspirated AirfoilsJournal of Turbomachinery, 2003
- Influence of Compressor Exit Conditions on Combustor Annular Diffusers, Part 1: Diffuser PerformanceJournal of Propulsion and Power, 2001
- Influence of Compressor Exit Conditions on Combustor Annular Diffusers Part II: Flow RedistributionJournal of Propulsion and Power, 2001
- The 1993 IGTI Scholar Lecture: Loss Mechanisms in TurbomachinesJournal of Turbomachinery, 1993
- The influence of blade wakes on the performance of combustor shortened prediffusersJournal of Aircraft, 1984
- Performance of Annular Combustor-Dump DiffusersJournal of Aircraft, 1977
- Duct performance parameters considering spatially non-uniform flow1972