Design and Implementation of a Test-Bench for Efficiency Measurement of Domestic Induction Heating Appliances
Open Access
Abstract
The operation of a domestic induction cooktop is based on the wireless energy transfer from the inductor to the pot. In such systems, the induction efficiency is defined as the ratio between the power delivered to the pot and the consumed power from the supplying converter. The non-transferred power is dissipated in the inductor, raising its temperature. Most efficiency-measuring methods are based on measuring the effective power (pot) and the total power (converter output). While the converter output power is directly measurable, the measurement of the power dissipation in the pot is usually a cause of inaccuracy. In this work, an alternative method to measure the system’s efficiency is proposed and implemented. The method is based on a pot with a reversible base to which the inductor is attached. In the standard configuration, the inductor is placed below the pot in such a way that the delivered power is used to boil water, and the power losses are dissipated to the air. When the pot base is flipped, the inductor is immersed into the water. In this case the losses in the inductor also contribute to heating up and boiling the water. The induction efficiency is calculated from the boiling rates in both configurations. A commercial inductor was tested under real working conditions with consistent results.Keywords
Funding Information
- Spanish MINECO (TEC2013-42937-R, RTC-2014-1847-6)
- DGA-FSE
- BSH Hausgeräte
This publication has 19 references indexed in Scilit:
- Design and Control of a 3 kW Wireless Power Transfer System for Electric VehiclesEnergies, 2015
- Industrial Energy Management Decision Making for Improved Energy Efficiency—Strategic System Perspectives and Situated Action in CombinationEnergies, 2015
- A Critical Review of Wireless Power Transfer via Strongly Coupled Magnetic ResonancesEnergies, 2014
- Energy Efficiency Benefits: Is Technophilic Optimism Justified?IEEE Transactions on Engineering Management, 2014
- Experimental Analysis of Wireless Power Transmission with Spiral ResonatorsEnergies, 2013
- Characteristic Evaluation on the Cooling Performance of an Electrical Air Conditioning System Using R744 for a Fuel Cell Electric VehicleEnergies, 2012
- TM-TE DECOMPOSITION OF POWER LOSSES IN MULTI-STRANDED LITZ-WIRES USED IN ELECTRONIC DEVICESProgress In Electromagnetics Research, 2012
- ZCS $LCC$-Compensated Resonant Inverter for Inductive-Power-Transfer ApplicationIEEE Transactions on Industrial Electronics, 2010
- Computationally efficient winding loss calculation with multiple windings, arbitrary waveforms, and two-dimensional or three-dimensional field geometryIEEE Transactions on Power Electronics, 2001
- Optimal choice for number of strands in a litz-wire transformer windingIEEE Transactions on Power Electronics, 1999