Technologies for Power Device Packaging by Using Solid Liquid Interdiffusion Bonding - SLID
- 10 November 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 31-32
Abstract
This paper presents several approaches for bonding at low temperature with a resulting interface alloy that is stable at temperatures higher than the bonding temperature itself. The bonding principle described herewith is called Solid Liquid Interdiffusion (SLID) bonding, where two metals were used for creating an alloy. First, a low melting point metal defines the process temperature e. g. Sn, In, or Ga. With a high solubility, a second metal forms together with the first metal intermetallic phase(s) during isothermal solidification. By the concentration and the stoichiometric relation of the components the liquid phase while bonding is mainly controlled. This paper will show different material combinations and different deposition technologies for the metals used with regard to efficient fabrication processes.Keywords
This publication has 7 references indexed in Scilit:
- A Novel Method for MEMS Wafer-Level Packaging: Selective and Rapid Induction Heating for Copper-Tin SLID Bonding2019
- Wafer-Level Vacuum Packaging of Smart SensorsSensors, 2016
- Low-Temperature Wafer Bonding Using Solid-Liquid Inter-Diffusion MechanismJournal of Microelectromechanical Systems, 2015
- Optimized Cu-Sn Wafer-Level Bonding Using Intermetallic Phase CharacterizationJournal of Electronic Materials, 2013
- Suppression of Cu3Sn and Kirkendall voids at Cu/Sn-3.5Ag solder joints by adding a small amount of GeJournal of Materials Science: Materials in Electronics, 2011
- Fabrication of large diameter external-diffusion processed Nb3Sn compositesIEEE Transactions on Magnetics, 1983
- Semiconductor Joining by the Solid-Liquid-Interdiffusion (SLID) ProcessJournal of the Electrochemical Society, 1966