Based on measurements, it has been shown that lateral rail wear on transition curves is characterized by significant irregularity. The presented tribological model of the wheel – rail system demonstrates the complex nature of rail wear phenomena. This tribological model constitutes a particular case of a generalized dynamic system with multiple inputs and outputs. In the case of transition curves, lateral rail wear is influenced by the curvature of the transition curve. Generali zed dynamic systems will be emp loyed to determine the relationship between the curvature of the transition curve and the corresponding lateral rail wear. Discrete measurements (taken at 1 - meter intervals) of lateral rail wear on the transition curve will be used for system identification as a function of distance, taking into account the effect of curvature on rail wear. To avoid approximation of the measurement data, continuous dynamic systems were not used for this identification. Instead, discrete dynamic systems (without approximation of measurements) were applied, associated with difference equations d escribed using the operator S { x k } = { x k + 1 − x k } in the space C(N) of real or complex sequences { x k } . The proposed method for identifying rail wear as a function of distance has shown that fifth - order difference equations, with an error smaller than 0 . 18 mm, describe the relationship between lateral rail wear on a transition curve and its curvature. The construction of the appropriate difference equation involved, among others, Hilbert spaces, the concept of linear independence and its properties , as well as the notion of identification error. To solve the obtained difference (recursive) equation, Heaviside operators c orresponding to the operation T q , which, among other properties, satisfies the condition ST q =id., were employed. It was also noted that the obtained difference equation can be solved (after appropriate transformations) using the operation S 1 { x k } = { x k + 1 } , along with a suitable Heaviside operator or the Z - transform. The resulting relationship between lateral rail wear on a transition curve and its curvature may be applied in practice to prevent excessive rail wear and to extend rail service life.