Eligiusz Mieloszyk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Eligiusz Mieloszyk has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Sławomir Grulkowski
Faculty of Civil and Environmental Engineering, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, Poland
5 shared publications - Anita Milewska
Gdańsk University of Technology , Faculty of Civil and Environmental Engineering , Poland
3 shared publications Anita Milewska
Gdańsk University of Technology, Faculty of Civil and Environmental Engineering, 11/12 Narutowicza Str., 80-233 Gdańsk, Poland
2 shared publications- Anita Milewska
Faculty of Civil and Environmental Engineering Gdańsk University of Technology 11/12 Gabriela Narutowicza Street 80-233 Gdańsk Poland
2 shared publications - Marcin Abramski
Gdansk University of Technology, ul. Narutowicza 11/12, 80-233 Gdansk, Poland
1 shared publication Mariusz Wyroslak
Gdansk University of Technology, Faculty of Civil and Environmental Engineering, ul. Narutowicza11/12, 80-233 Gdansk, Poland
1 shared publication
Latest Publications
- Open Access
- 1 November 2026
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (1)
Determination of the Relationship between Lateral Rail Wear on a Transition Curve and Its Curvature Using Generalized Dynamical Systems
Based on measurements, it has been shown that lateral rail wear on transition curves is characterized by significant irregularity. The presented tribological model of the wheel – rail system demonstrates the complex nature of rail wear phenomena. This tribological model constitutes a particular case of a generalized dynamic system with multiple inputs and outputs. In the case of transition curves, lateral rail wear is influenced by the curvature of the transition curve. Generali zed dynamic systems will be emp loyed to determine the relationship between the curvature of the transition curve and the corresponding lateral rail wear. Discrete measurements (taken at 1 - meter intervals) of lateral rail wear on the transition curve will be used for system identification as a function of distance, taking into account the effect of curvature on rail wear. To avoid approximation of the measurement data, continuous dynamic systems were not used for this identification. Instead, discrete dynamic systems (without approximation of measurements) were applied, associated with difference equations d escribed using the operator S { x k } = { x k + 1 − x k } in the space C(N) of real or complex sequences { x k } . The proposed method for identifying rail wear as a function of distance has shown that fifth - order difference equations, with an error smaller than 0 . 18 mm, describe the relationship between lateral rail wear on a transition curve and its curvature. The construction of the appropriate difference equation involved, among others, Hilbert spaces, the concept of linear independence and its properties , as well as the notion of identification error. To solve the obtained difference (recursive) equation, Heaviside operators c orresponding to the operation T q , which, among other properties, satisfies the condition ST q =id., were employed. It was also noted that the obtained difference equation can be solved (after appropriate transformations) using the operation S 1 { x k } = { x k + 1 } , along with a suitable Heaviside operator or the Z - transform. The resulting relationship between lateral rail wear on a transition curve and its curvature may be applied in practice to prevent excessive rail wear and to extend rail service life.
- 1 November 2026
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (1)
Open AccessDetermination of the Relationship between Lateral Rail Wear on a Transition Curve and Its Curvature Using Generalized Dynamical Systems
Based on measurements, it has been shown that lateral rail wear on transition curves is characterized by significant irregularity. The presented tribological model of the wheel – rail system demonstrates the complex nature of rail wear phenomena. This tribological model constitutes a particular case of a generalized dynamic system with multiple inputs and outputs. In the case of transition curves, lateral rail wear is influenced by the curvature of the transition curve. Generali zed dynamic systems will be emp loyed to determine the relationship between the curvature of the transition curve and the corresponding lateral rail wear. Discrete measurements (taken at 1 - meter intervals) of lateral rail wear on the transition curve will be used for system identification as a function of distance, taking into account the effect of curvature on rail wear. To avoid approximation of the measurement data, continuous dynamic systems were not used for this identification. Instead, discrete dynamic systems (without approximation of measurements) were applied, associated with difference equations d escribed using the operator S { x k } = { x k + 1 − x k } in the space C(N) of real or complex sequences { x k } . The proposed method for identifying rail wear as a function of distance has shown that fifth - order difference equations, with an error smaller than 0 . 18 mm, describe the relationship between lateral rail wear on a transition curve and its curvature. The construction of the appropriate difference equation involved, among others, Hilbert spaces, the concept of linear independence and its properties , as well as the notion of identification error. To solve the obtained difference (recursive) equation, Heaviside operators c orresponding to the operation T q , which, among other properties, satisfies the condition ST q =id., were employed. It was also noted that the obtained difference equation can be solved (after appropriate transformations) using the operation S 1 { x k } = { x k + 1 } , along with a suitable Heaviside operator or the Z - transform. The resulting relationship between lateral rail wear on a transition curve and its curvature may be applied in practice to prevent excessive rail wear and to extend rail service life.
- Open Access
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Non-Classical Operational Calculus in the Analysis of the Behavior of Geosynthetics in Railway Engineering Structures
One of the basic tasks of communication structures is to safely carry loads and then transfer them to the ground. In the case of railway surfaces, in addition to static loads, dynamic loads are of particular importance. In the discussed case, this involves adopting an appropriate model to describe the behavior of geosynthetics in railway engineering structures. When analyzing the cooperation of geosynthetics with elements of an engineering structure (e.g. subgrade, subsoil, pipeline), we can treat them, for example, as elastic membranes or coatings placed on various types of substrate. Modeling a real system means idealizing it in terms of taking into account those features of the medium and its elements that seem most important from the point of view of the analyzed problem. A physical model will be built, followed by a mathematical model using non-classical operational calculus. The mentioned operational calculus is not based, as is the case with the classical operator calculus, on integral transformations (Laplace, Laplace-Carson, Fourier, Mellin, Hankel, etc.). Therefore, it is freed from many limiting assumptions required in the case of classical operational calculus. The non-classical operational calculus is based on three arbitrary linear operations S, T, s and two arbitrary linear spaces L0, L1. This allows us to create continuous and discrete models and analyze them in a uniform way. In the mathematical description of the behavior of geosynthetics in railway engineering structures in the continuous domain, the Laplace operator △ = ∇2 and the d'Alembert operator □ are used. The d'Alembert operator is treated as an operation S, for which operations T, s are selected and the location of points P from the geosynthetic at time t is determined. Assuming S as an operation defined in the space of multi-point sequences allows us to analyze the formulated problem in the discrete domain. Such approach to the analyzed problem allows us to determine the location of P points from the geosynthetic at time t using analytical, numerical or hybrid methods.
- 5 November 2025
- Published by Polish Mineral Engineering Society in Inżynieria Mineralna
- Vol. 2 (2)
Open AccessNon-Classical Operational Calculus in the Analysis of the Behavior of Geosynthetics in Railway Engineering Structures
One of the basic tasks of communication structures is to safely carry loads and then transfer them to the ground. In the case of railway surfaces, in addition to static loads, dynamic loads are of particular importance. In the discussed case, this involves adopting an appropriate model to describe the behavior of geosynthetics in railway engineering structures. When analyzing the cooperation of geosynthetics with elements of an engineering structure (e.g. subgrade, subsoil, pipeline), we can treat them, for example, as elastic membranes or coatings placed on various types of substrate. Modeling a real system means idealizing it in terms of taking into account those features of the medium and its elements that seem most important from the point of view of the analyzed problem. A physical model will be built, followed by a mathematical model using non-classical operational calculus. The mentioned operational calculus is not based, as is the case with the classical operator calculus, on integral transformations (Laplace, Laplace-Carson, Fourier, Mellin, Hankel, etc.). Therefore, it is freed from many limiting assumptions required in the case of classical operational calculus. The non-classical operational calculus is based on three arbitrary linear operations S, T, s and two arbitrary linear spaces L0, L1. This allows us to create continuous and discrete models and analyze them in a uniform way. In the mathematical description of the behavior of geosynthetics in railway engineering structures in the continuous domain, the Laplace operator △ = ∇2 and the d'Alembert operator □ are used. The d'Alembert operator is treated as an operation S, for which operations T, s are selected and the location of points P from the geosynthetic at time t is determined. Assuming S as an operation defined in the space of multi-point sequences allows us to analyze the formulated problem in the discrete domain. Such approach to the analyzed problem allows us to determine the location of P points from the geosynthetic at time t using analytical, numerical or hybrid methods.
- Open Access
- 1 March 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (1) , 147-153
Explosive Charge Applications in Seabed Strengthening for Underwater Pipelines
The importance and impact of subsoil quality is discussed with regard to the safety and reliability of underwater pipelines. Non-classical operational analysis is employed to define generalised dynamic systems. A model incorporating loading of the subsoil acting on a pipeline immersed in an underwater excavation is a specific case of a generalised dynamic system. This paper justifies the incorporation of the analytical method of generalised dynamic systems into the selected model. An innovative, non-standard and effective method is proposed to compact and improve the subsoil for underwater pipeline foundations using blasting charges.
- 1 March 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (1) , 147-153
Open AccessExplosive Charge Applications in Seabed Strengthening for Underwater Pipelines
The importance and impact of subsoil quality is discussed with regard to the safety and reliability of underwater pipelines. Non-classical operational analysis is employed to define generalised dynamic systems. A model incorporating loading of the subsoil acting on a pipeline immersed in an underwater excavation is a specific case of a generalised dynamic system. This paper justifies the incorporation of the analytical method of generalised dynamic systems into the selected model. An innovative, non-standard and effective method is proposed to compact and improve the subsoil for underwater pipeline foundations using blasting charges.
- 27 September 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- Vol. 70 (3) , 5-17
Triple correlation states between in-situ tested soil parameters
When testing soil parameters, the measured parameter values are only approximations of the true values. The measurand is determined based on metrological uncertainties or using statistical models for analysing data. Some parameters of the soil state present strong correlations, but others do not always provide simple correspondences. Multiple correlations between geotechnical parameters can provide a new perspective regarding the mutual relations between these parameters and may improve the fit of different soil parameters in geotechnical design procedures. Statistical modelling based on observed data generally involves a comparison between theoretical expectancies and practical surveys. Multidimensional regression models are useful for revealing the influences of several independent variables on one dependent variable. Statistical parameters and a quantitative approach can be used to define the relationships between several factors. Presented results claim that triple depended correlations may bring some corrects in relationships of soil parameters as against to double depended correlations. The differences in coefficients of determination are significant. Three variables involved stronger correlations.
- 27 September 2024
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- Vol. 70 (3) , 5-17
Triple correlation states between in-situ tested soil parameters
When testing soil parameters, the measured parameter values are only approximations of the true values. The measurand is determined based on metrological uncertainties or using statistical models for analysing data. Some parameters of the soil state present strong correlations, but others do not always provide simple correspondences. Multiple correlations between geotechnical parameters can provide a new perspective regarding the mutual relations between these parameters and may improve the fit of different soil parameters in geotechnical design procedures. Statistical modelling based on observed data generally involves a comparison between theoretical expectancies and practical surveys. Multidimensional regression models are useful for revealing the influences of several independent variables on one dependent variable. Statistical parameters and a quantitative approach can be used to define the relationships between several factors. Presented results claim that triple depended correlations may bring some corrects in relationships of soil parameters as against to double depended correlations. The differences in coefficients of determination are significant. Three variables involved stronger correlations.
- 3 April 2024
- Published by Elsevier in Measurement
- Vol. 232
Determination of the shape of the CFGFT cylindrical column based on laboratory tests
- 3 April 2024
- Published by Elsevier in Measurement
- Vol. 232
Determination of the shape of the CFGFT cylindrical column based on laboratory tests
- Open Access
- 24 June 2021
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- Vol. 67 (2) , 117-132
Safety at railway level crossings and Vision Zero
In this work, safety analysis at the railway level crossings is presented using advanced mathematical modelling. Resistivity of track subgrade panels is taken into account. The analysis does not refer to the assessment of the current regulations. Specific cases of generalized dynamic system are considered by introducing operations S=Δ, S=P defined in space C(N) of real sequences. In this model, generalized discrete exponential and trigonometric functions that reflect the oscillatory nature of the analysed quantities are used. The advantage of the analyzes is the avoidance of numerical errors. We show also the importance of the resistivity of track subgrade panels in safety at the level crossings. The safety at the level crossings can be increased through providing track subgrade panels with appropriate resistivity to minimize negative effect of stray currents. The results may be used to evaluate selected safety indicators as well as to predict safety levels and to determine the ways of improving safety.
- 24 June 2021
- Published by Polish Academy of Sciences Chancellery in Archives of Civil Engineering
- Vol. 67 (2) , 117-132
Open AccessSafety at railway level crossings and Vision Zero
In this work, safety analysis at the railway level crossings is presented using advanced mathematical modelling. Resistivity of track subgrade panels is taken into account. The analysis does not refer to the assessment of the current regulations. Specific cases of generalized dynamic system are considered by introducing operations S=Δ, S=P defined in space C(N) of real sequences. In this model, generalized discrete exponential and trigonometric functions that reflect the oscillatory nature of the analysed quantities are used. The advantage of the analyzes is the avoidance of numerical errors. We show also the importance of the resistivity of track subgrade panels in safety at the level crossings. The safety at the level crossings can be increased through providing track subgrade panels with appropriate resistivity to minimize negative effect of stray currents. The results may be used to evaluate selected safety indicators as well as to predict safety levels and to determine the ways of improving safety.
- Open Access
- 16 November 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 231, 05005
Effect of vehicle motion stability after impact/crash on traffic safety
The article presents the application of general stability theory to the study of road traffic stability immediately after an impact (crash, collision). It turns out that when modelling a collision, vehicles can be treated as colliding masses and dynamical systems can be assigned to this phenomenon.
- 16 November 2018
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 231, 05005
Open AccessEffect of vehicle motion stability after impact/crash on traffic safety
The article presents the application of general stability theory to the study of road traffic stability immediately after an impact (crash, collision). It turns out that when modelling a collision, vehicles can be treated as colliding masses and dynamical systems can be assigned to this phenomenon.