Elucidating Degradation Phenomena During Mixing of Silica‐Natural Rubber Compounds: The Interplay of Viscoelastic Behavior and Silane Microstructures
Open Access
- 19 August 2025
- journal article
- Published by Wiley in Polymer Engineering & Science
- Vol. 65 (10) , 5611-5626
Abstract
Various commercial silica‐silane coupling agent combinations are used these days for synthetic rubber‐based passenger car tire treads with high silica‐loadings. For truck tire treads, much lower silica‐loadings are employed in combination with Natural Rubber (NR). The present study examines the impact of various commercial silane coupling agents on degradation phenomena during mixing of silica‐filled NR compounds by analyzing changes in viscoelastic response, with a focus on different silane microstructures. A novel approach using delta–delta (Δδ) values to quantify branch formation caused by degradation‐induced chain modifications has been adopted. Unfilled NR compounds primarily undergo polymer chain scission from thermo‐mechanical and thermo‐oxidative influences. During mixing, bis‐(3‐TriEthoxySilylPropyl) Tetrasulfide (TESPT) silane creates silica‐rubber coupling and lightly crosslinked materials partly based on polysulfidic bonds. The lightly crosslinked rubber essentially sustains the reinforcement level in the compounds, counterbalancing the degradation effect. However, predominant degradation at 180°C significantly deteriorates the mechanical and dynamic properties of compounds containing both TESPT and TESPD (bis‐(3‐Triethoxysilylpropyl) disulfide). OTPTES (3‐OctanoylThioPropylTriEthoxySilane) and MTCO (Mercapto‐ThioCarboxylate Oligomer) silane‐based compounds exhibit notable plasticization effects along with degradation. The choice of OTPTES in particular demonstrates excellent thermal stability, preserving mechanical properties even till 180°C. MTCO, with one reactive mercaptan group, couples efficiently with rubber at low dump temperatures, 130°C and 150°C, enhancing vulcanizate properties. At high dump temperatures of 170°C and 180°C, though, MTCO releases plasticizing moieties during mixing, leading to inferior final properties. The present study highlights the intricate balance between rubber degradation, crosslinking, branching, network formation, rubber‐filler interactions, and plasticization effects specifically in silica‐filled NR compounds for truck tire tread applications.Keywords
Funding Information
- Faculty of Science and Technology, Pokhara University
This publication has 20 references indexed in Scilit:
- Suppressed degradation by stabilizers during mixing of silica/silane-filled natural rubberPolymer Degradation and Stability, 2024
- Changes in natural rubber mechanical behavior during oxidation: Relationship with oxygen consumptionPolymer Degradation and Stability, 2024
- Degradation during Mixing of Silica-Reinforced Natural Rubber CompoundsMaterials, 2024
- 3‐Octanoylthio‐1‐propyltriethoxysilane functionalized silica/rubber composites for application in tire: Structure, performance and synergismPolymer Composites, 2022
- Natural rubber and epoxidized natural rubber in combination with silica fillers for low rolling resistance tires2021
- Effects of silanization temperature and silica type on properties of silica‐filled solution styrene butadiene rubber (SSBR) for passenger car tire tread compoundsJournal of Applied Polymer Science, 2016
- Mechanistic aspects of silane coupling agents with different functionalities on reinforcement of silica‐filled natural rubber compoundsPolymer Engineering & Science, 2014
- Viscosity, Relaxation and Stability of Natural RubberThe Open Macromolecules Journal, 2009
- The use of a silanised silica filler to reinforce and crosslink natural rubberInternational Journal of Adhesion and Adhesives, 2005
- Effects of mixing conditions on the reaction of 3‐octanoylthio‐1‐propyltriethoxysilane during mixing with silica filler and natural rubberJournal of Applied Polymer Science, 2004