Coordination flexibility as key factor for variability of local structure in amorphous Zn–Sn–O and Cu–Sn–O thin films
Open Access
- 1 June 2026
- journal article
- Published by IOP Publishing in Journal of Physics: Materials
- Vol. 9 (3) , 035001
Abstract
Earth-abundant amorphous oxide semiconductors like Zn–Sn–O and Cu–Sn–O feature electrical conductivities that can be tuned over several orders of magnitude by adjusting the metal composition and oxygen content. This study investigates the element-specific local structure and amorphous nature of Zn–Sn–O and Cu–Sn–O thin films with varying Zn/Sn and Cu/Sn ratios, grown at different oxygen partial pressures by room temperature pulsed laser deposition. X-ray absorption spectroscopy was performed at the Zn, Cu and Sn K -edges, providing local coordination and structural parameters for each metal species by in-depth analysis of near edge and extended fine structures. Except for very high copper contents, all thin films are fully amorphous with no noticeable order beyond the first coordination shell. Zinc atoms keep a tetrahedral configuration with an average bond length slightly larger than that of crystalline ZnO. Tin atoms prefer an octahedral coordination similar to crystalline SnO 2 but with reduced average coordination number and slightly smaller average bond length. Copper atoms feature a CuO-like coordination with reduced average coordination number and bond length for high copper contents, while further reduction of these structural parameters for low copper contents indicates a broad distribution of local environments. The variability of the Zn–O, Sn–O and Cu–O local building blocks is thus determined by the coordination flexibility of the respective metal, being small for zinc with only one stable oxide but large for tin and copper with two stable oxides at ambient conditions. The dominant effect of the metal composition on the electrical properties of the material is given by the changing fraction of Zn–O, Cu–O and Sn–O building blocks. Undercoordinated tin atoms provide negative charge carriers, leading to increasing n-type conductivity with increasing tin content. In contrast, CuO-like environments promote p-type conductivity for Cu–Sn–O thin films with high enough copper contents.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (FOR 2857)
- DESY (Deutsches Elektronen-Synchrotron), Hamburg, Germany (I-20230414)
This publication has 53 references indexed in Scilit:
- Amorphous IGZO Thin‐film Transistors: Materials, Device Structures, Fabrications, and Application ExplorationsAdvanced Functional Materials, 2025
- Influence of Cation Ratio and Oxygen Deposition Pressure on Optical and Electrical Transport Properties of Amorphous Copper Tin Oxide Thin FilmsPhysica Status Solidi (RRL) – Rapid Research Letters, 2025
- Demonstration of Two Multi‐Component Target Ablation Approaches and Their Application in Combinatorial Pulsed Laser DepositionAdvanced Physics Research, 2024
- Perspective: Zinc‐Tin Oxide Based Memristors for Sustainable and Flexible In‐Memory Computing Edge DevicesAdvanced Electronic Materials, 2023
- Oxygen‐Induced Phase Separation in Sputtered Cu–Sn–I–O Thin FilmsPhysica Status Solidi (a), 2023
- High‐performance vacuum‐processed metal oxide thin‐film transistors: A review of recent developmentsJournal of the Society for Information Display, 2020
- Low‐Voltage Operation of Ring Oscillators Based on Room‐Temperature‐Deposited Amorphous Zinc‐Tin‐Oxide Channel MESFETsAdvanced Electronic Materials, 2019
- Recent Advances in Understanding the Structure and Properties of Amorphous Oxide SemiconductorsAdvanced Electronic Materials, 2017
- Binary copper oxide semiconductors: From materials towards devicesPhysica Status Solidi (b), 2012
- Evidence for Tetrahedral Zinc in Amorphous In2–2xZnxSnxO3 (a‐ZITO)Zeitschrift für anorganische und allgemeine Chemie, 2011