A Method for Evaluating the Worst-Case Cogging Torque Under Manufacturing Uncertainties
- 20 May 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 35 (4) , 1837-1848
Abstract
Permanent-magnet (PM) motors have been widely used in industrial applications and automobiles. However, owing to the design tolerances, manufacturing uncertainties, and material inconsistency, deviations from the ideal motor inevitably occur with parasitic effects, such as additional cogging torque and vibration. One of the most significant obstacles for evaluating these uncertainties is the large computational burden caused by the countless uncertain combinations, which must be computed via the finite-element method (FEM). Herein, a worst—uncertain—combination—analyze (WUCA) method is proposed to significantly reduce the computational cost. A widely used analytical method is modified to identify the origin of additional cogging-torque harmonics caused by uncertainties. Different types of uncertainties for the surface-mounted PM machine and interior PM machine can be analyzed simultaneously. With the WUCA method, the worst-case combinations can be confirmed theoretically; thus, FEM calculations for only a few combinations of uncertainties are required, rather than thousands. Compared with the widely adopted design of experiments based uncertain combining methods, the worst-case cogging torque obtained from the WUCA is higher. FEM verification of different pole/slot configurations revealed that the WUCA method was a general and effective method for quickly estimating the worst-case cogging torque under manufacturing uncertainties.Keywords
Funding Information
- National Key R&D Program China (2017YFB0102400)
- China Scholarship Council (201806030163)
This publication has 25 references indexed in Scilit:
- Design of Experiments to Address Manufacturing Tolerances and Process Variations Influencing Cogging Torque and Back EMF in the Mass Production of the Permanent-Magnet Synchronous MotorsIEEE Transactions on Industry Applications, 2013
- Latin hypercube sampling with multidimensional uniformityJournal of Statistical Planning and Inference, 2012
- Issues in Reducing the Cogging Torque of Mass-Produced Permanent-Magnet Brushless DC MotorIEEE Transactions on Industry Applications, 2004
- New cogging-torque reduction method for brushless permanent-magnet motorsIEEE Transactions on Magnetics, 2003
- Torque characteristic analysis considering the manufacturing tolerance for electric machine by stochastic response surface methodIEEE Transactions on Industry Applications, 2003
- Design techniques for reducing the cogging torque in surface-mounted PM motorsIEEE Transactions on Industry Applications, 2002
- Various design techniques to reduce cogging torque by controlling energy variation in permanent magnet motorsIEEE Transactions on Magnetics, 2001
- Influence of design parameters on cogging torque in permanent magnet machinesIEEE Transactions on Energy Conversion, 2000
- Pulsating torque minimization techniques for permanent magnet AC motor drives-a reviewIEEE Transactions on Industrial Electronics, 1996
- A Comparison of Three Methods for Selecting Values of Input Variables in the Analysis of Output from a Computer CodeTechnometrics, 1979