Improving the thermal performance of a spherical latent thermal energy storage using innovative fins and porous media
Authors:
- 1 January 2025
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (1)
Abstract
The performance of latent heat thermal energy storage (LHTES) systems can be significantly enhanced by improving the thermal properties of phase change materials (PCMs). Today, these systems serve as a sustainable energy resource and find applications in various sectors, including energy conservation in buildings, household hot water systems, air conditioning units, peak load reduction, waste heat recovery, and biomedical applications. This paper investigates the effects of fins and metal foam on the melting and solidification rates of PCM within a spherical latent heat thermal energy storage unit (LHTESU). To assess the impact of fin geometry on energy storage efficiency, three types of fins were tested: fins with a constant length, fins with a variable length, and curved-shaped fins. Additionally, three different porosity levels of metal foam were considered. A finless reservoir filled with PCM was used as a baseline and benchmark to evaluate the performance enhancements provided by the different fin and metal foam configurations. The results indicated that utilizing seven fixed-length fins with a thickness of 1 mm represents the most effective configuration for increasing melting and solidification rates among the constant volume fraction cases, leading to reductions in melting and solidification times by 58.76% and 72.66%, respectively. Furthermore, incorporating metal foam significantly improved the phase change rate of the PCM, achieving reductions in melting time by 89.11% and solidification time by 94.96% when 85% porosity was used. These results highlight the potential of advanced fin designs and porous media in significantly enhancing the thermal energy storage efficiency, offering promising insights for future sustainable energy technologies.Keywords
This publication has 55 references indexed in Scilit:
- Numerical analysis of the influence of geometry parameters on charging and discharging performance of shell-and-tube latent thermal energy storage with longitudinal finsApplied Thermal Engineering, 2023
- A numerical evaluation of a latent heat thermal energy storage system in the presence of various types of nanoparticlesApplied Thermal Engineering, 2023
- Melting performance enhancement of a latent thermal energy storage device using innovative arc fins and nanoparticlesJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2023
- Design of a latent heat thermal energy storage system under simultaneous charging and discharging for solar domestic hot water applicationsApplied Energy, 2023
- A metal mesh net-packed method for improving thermochemical energy storage reactor performance by increasing the void fractionApplied Thermal Engineering, 2023
- Numerical investigation and optimization of melting performance for thermal energy storage system partially filled with metal foam layer: New design configurationsApplied Thermal Engineering, 2022
- Optimization of thermal performance of high temperature sensible heat thermal energy storage system for direct steam generation: A simulation workApplied Thermal Engineering, 2022
- Melting behavior of the latent heat thermal energy storage unit with fins and graded metal foamApplied Thermal Engineering, 2021
- Enhancement of phase change rate of PCM in cylindrical thermal energy storageApplied Thermal Engineering, 2019
- Numerical and experimental investigation of paraffin wax melting in spherical cavityHeat and Mass Transfer, 2018