Highly Stable Pin Pull Test Method for PCB Pad Cratering Characterization
- 1 December 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-8
Abstract
Although the problem of pad cratering has become the focus of PCB manufacturing industry for nearly a decade, the existing test method and equipment have not been widely promoted in industrial usage. This approach is unsuitable for large-scale industrial application because the existing equipment and consumables are expensive, the test success rate is low, and the test procedure requires human operation. In this study, a pin pull test method is proposed; it implements highly stable soldering between the pull pin and the target pad through the optimized pins and soldering method, thereby greatly improving the pulling success rate and obtaining ideal adaptability for micro-pads with diameter below 0.5 mm. In addition, the pull pin can be repeatedly used, effectively reducing testing costs. A stable control of the solder ball size without human intervention can be achieved with the unique solder ball generating method. The key parameters, such as the peak soldering temperature, pulling speed, and the matching relationship between pull pin and target pads, are studied in the experiment. The success rates of the test for 0.3 and 0.5 mm pads are validated, and results indicate that the test stability on pad soldering and pulling is remarkably improved.Keywords
Funding Information
- National Natural Science Foundation of China (62264003)
- Guangxi Natural Science Foundation Program (2023GXNSFAA026188)
- Innovation-Driven Development Project of Guangxi Province (GuiKeAA21077015)
- Guilin Science Research and Technology Development Program (20220107-2)
- Innovation Project of GUET Graduate Education (2022YCXS022, 2021YCXB01)
This publication has 13 references indexed in Scilit:
- Deep Siamese Semantic Segmentation Network for PCB Welding Defect DetectionIEEE Transactions on Instrumentation and Measurement, 2022
- A Small-Sized Object Detection Oriented Multi-Scale Feature Fusion Approach With Application to Defect DetectionIEEE Transactions on Instrumentation and Measurement, 2022
- Simulation analysis of the influence of test conditions on the bonding strength of PCB pads2021
- Evaluation of FCBGA Package Subjected to Four-Point Bend Reliability Test Using Fiber Array Laser Ultrasonic Inspection SystemIEEE Transactions on Components, Packaging and Manufacturing Technology, 2019
- A novel pin-pull tester and its application on PCB pad cratering assessment2015
- A novel soldering method to evaluate PCB pad cratering for pin-pull testingMicroelectronics Reliability, 2013
- Assessment of solder pad cratering strength using cold pin pull test method with pre-fabricated pin arrays2013
- Novel Testing Instrument for Lead-Free Solder CharacterizationIEEE Transactions on Instrumentation and Measurement, 2011
- Method for early detection of PCB bending induced pad cratering2011
- A testing method for assessing solder joint reliability of FCBGA packagesMicroelectronics Reliability, 2004