Modification of Surface and Subsurface Properties of AA1050 Alloy by Shot Peening
Open Access
Abstract
AA1050 Al alloy samples were shot-peened using stainless-steel shots at shot peening (SP) pressures of 0.1 and 0.5 MPa and surface cover rates of 100% and 1000% using a custom-designed SP system. The hardness of shot-peened samples was around twice that of unpeened samples. Hardness increased with peening pressure, whereas the higher cover rate did not lead to hardness improvement. Micro-crack formation and embedment of shots occurred by SP, while average surface roughness increased up to 9 µm at the higher peening pressure and cover rate, indicating surface deterioration. The areal coverage of the embedded shots ranged from 1% to 5% depending on the peening parameters, and the number and the mean size of the embedded shots increased at the higher SP pressure and cover rate. As evidenced and discussed through the surface and cross-sectional SEM images, the main deformation mechanisms during SP were schematically described as crater formation, folding, micro-crack formation, and material removal. Overall, shot-peened samples demonstrated improved mechanical properties, whereas sample surface integrity only deteriorated notably during SP at the higher pressure, suggesting that selecting optimal peening parameters is key to the safe use of SP. The implemented methodology can be used to modify similar soft alloys within confined compromises in surface features.Keywords
Funding Information
- Kocaeli Üniversitesi (: 2017/049)
- Nazarbayev University (Policy Grant (SPG) Program)
This publication has 84 references indexed in Scilit:
- Incongruent dissolution of copper in an Al–Cu assembling. Influence of local pH changesSurface and Interface Analysis, 2013
- Surface hardening of aluminum alloy by shot peening treatment with Zn based ballMaterials Science and Engineering: A, 2012
- The development of hardness homogeneity in pure aluminum and aluminum alloy disks processed by high-pressure torsionMaterials Science and Engineering: A, 2011
- Fatigue life enhancement of aluminum alloy for aircraft by Fine Particle Shot Peening (FPSP)Journal of Materials Processing Technology, 2011
- Experimental investigation and fatigue life prediction for 7475-T7351 aluminum alloy with and without shot peening-induced residual stressesActa Materialia, 2011
- The effects of laser peening and shot peening on high cycle fatigue in 7050-T7451 aluminum alloyMaterials Science and Engineering: A, 2010
- Enhancement of mechanical properties and grain size refinement of commercial purity aluminum 1050 processed by ECAPMaterials Science and Engineering: A, 2007
- Performance and applications of nanostructured materials produced by severe plastic deformationScripta Materialia, 2004
- Effects of shot-peening on surface contact angles of biomaterialsJournal of Materials Science: Materials in Medicine, 1993
- The initiation of ductile fracture in pure metalsPhilosophical Magazine, 1962