Influence of Nano Boric Acid Material in Bio-Diesel Blends to Enhance the Surface Quality with Minimum Quality Lubrication
Open Access
- 10 August 2022
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2022, 1-10
Abstract
Machining with conventional process of lubrication is a general industrial practice for diminishing cutting forces, high temperature, and friction. During the machining process, cutting fluid characteristics plays a crucial role in enhancing machining performance when it is properly chosen. The harmful gases during machining process are often hazardous to individuals and the environment. It is also economically unviable if the cutting fluid cost, method of application, and flow rate is underestimated. Due to chip obstruction and poor absorption, a high amount of heat is liberated and as a result high quantity and high quality of lubricant or coolant are need to be supplied between the chip-tool interfaces consistently. This process becomes costly and degrades the environment. In the current work, nano powder of boric acid is chosen as solid type lubricant in turning process, which is blended with bio-diesel consisting of coconut oil as base oil. The outcomes of nano powder mixed bio-diesel cutting fluids exhibited significant enhancement in machining characteristics when it is compared with wet and dry machining. And also, Taguchi method of orthogonal representation is considered to determine the optimum weight percentage of the bio-diesel blends at different conditions of the machining process. The optimum machining conditions were obtained at high machining operation with a feed of 0.04 mm/min, speed of 600 rpm, and toll diameter of 0.5 mm.Keywords
This publication has 22 references indexed in Scilit:
- Dispersion stability and thermophysical properties of environmentally friendly graphite oil–based nanofluids used in machiningAdvances in Mechanical Engineering, 2016
- Performance evaluation and optimization of nano boric acid powder weight percentage mixed with vegetable oil using the Taguchi approachJournal of Mechanical Science and Technology, 2015
- Investigation of Ionic Liquids as Novel Metalworking Fluids during Minimum Quantity Lubrication Machining of a Plain Carbon SteelProcedia CIRP, 2015
- Novel uses of SiO2 nano-lubrication system in hard turning process of hardened steel AISI4140 for less tool wear, surface roughness and oil consumptionJournal of Cleaner Production, 2014
- Effect of Nano Hexagonal Boron Nitride Lubricant Additives on the Friction and Wear Properties of AISI 4140 SteelParticulate Science and Technology, 2013
- Influence of boric acid additive size on green lubricant performancePhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2010
- Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steelInternational Journal of Machine Tools and Manufacture, 2010
- Studies on boundary lubrication properties of oxidised coconut and soy bean oilsLubrication Science, 2009
- Tribological evaluation of coconut oil as an environment-friendly lubricantTribology International, 2007
- Coconut oil as base oil for industrial lubricants—evaluation and modification of thermal, oxidative and low temperature propertiesTribology International, 2006