Probabilistic Dynamic Design Curves Optimized for High-Speed Reinforced Concrete Railway Bridges Using First-Order Reliability Method
- 5 September 2024
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 25 (24)
Abstract
Increasing the operating speed of trains in modern railway networks can induce greater actions on the infrastructure than was previously the case. This is due, in particular, to the occurrence of the resonance phenomenon in railway bridges, which is the focus of this paper and was not traditionally considered as a concern. In this context, the vibrations experienced by bridges, both vertical accelerations and displacements, are limited by design regulations to ensure that the safety of train passages over bridges and the comfort of passengers are guaranteed. However, previous studies have shown that the conventional dynamic design methods do not always result in conservative designs, nor is the achieved safety always consistent. Therefore, a probabilistic approach is adopted in this study to optimize the cross-section properties of various railway bridges in a wide design range including section types, span lengths, and number of spans. For this purpose, an iterative line search-based optimization problem is formulated to minimize the thickness of the cross-sections under consideration and consequently the linear mass of the bridges. Meanwhile, the associated failure probabilities of the above dynamic limit states are constrained to be less than the desired level of safety by incorporating them into the optimization constraint. In this regard, First-Order Reliability Method (FORM) is adopted to perform reliability analyses. Thus, the obtained results are presented in the form of design curves that may assist designers to select minimum cross-section dimensions satisfying the desired level of safety in terms of dynamic limit states. This objective can be achieved using the proposed design curves without the need to construct associated complex computational models and perform computationally expensive dynamic analyses.Keywords
Funding Information
- H2020 European Institute of Innovation and Technology (101101966)
This publication has 36 references indexed in Scilit:
- Track–bridge interaction effects in the acceleration and displacement response of high-speed railway bridges: Simplified vs refined modellingEngineering Structures, 2024
- Cancellation of resonance for elastically supported beams subjected to successive moving loads: Optimal design condition for bridgesEngineering Structures, 2024
- Assessment of train running safety on bridges: A literature reviewEngineering Structures, 2021
- On the optimal strategy of stochastic-based reliability assessment of railway bridges for high-speed trainsMeccanica, 2019
- An equivalent additional damping approach to assess vehicle-bridge interaction for train-induced vibration of short-span railway bridgesEngineering Structures, 2019
- Reliability assessment of railway bridges subjected to high-speed trains considering the effects of seasonal temperature changesEngineering Structures, 2016
- Statistical screening of modelling alternatives in train–bridge interaction systemsEngineering Structures, 2014
- Seasonal effects on the stiffness properties of a ballasted railway bridgeEngineering Structures, 2013
- Safety assessment of a short span railway bridge for high-speed traffic using simulation techniquesEngineering Structures, 2012
- Passenger transport and CO2 emissions: What does the French transport survey tell us?Atmospheric Environment, 2009