Raid Karoumi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Raid Karoumi has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- John Leander
KTH Royal Institute of Technology
6 shared publications - Andreas Andersson
Division of Structural Engineering and Bridges, KTH Royal Institute of Technology, Stockholm, Sweden
5 shared publications - Reza Allahvirdizadeh
Division of Structural Engineering and Bridges, KTH Royal Institute of Technology, Stockholm, Sweden
3 shared publications A. Andersson
2 shared publications- Costin Pacoste
Adjunct Professor Division of Structural Engineering and Bridges, KTH Royal Institute of Technology , Brinellvägen 23, SE- 100 44 , Stockholm . Chief Technical Officer, ELU Konsult, Valhallavägen 117, SE- 115 31 Stockholm
2 shared publications D. Colmenares
2 shared publications
Latest Publications
- 1 August 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (8)
Temperature-Induced Displacement Monitoring in Large-Span Bridges Using Multitemporal InSAR—A case study
Large-span balanced cantilever bridges experience significant thermally induced displacements, and insufficient expansion-joint capacity can lead to elevated internal stresses and long-term structural damage. Addressing this problem conventionally requires installing in-situ sensors, which provide high temporal resolution but are costly, intrusive, and limited in spatial coverage. This study presents a multitemporal Interferometric Synthetic Aperture Radar (InSAR)–based Structural Health Monitoring framework designed to capture and interpret these thermal displacements. A tailored spatial-filtering strategy is developed to address the difficulty of identifying coherent scatterers on slender bridge decks. These points are subsequently grouped by structural control nodes—piers and expansion joints—to isolate differential thermal responses across spans and cantilever segments. The framework is demonstrated on the Strängnäs Bridge in Sweden, which experiences large annual temperature fluctuations from –12 °C to 30 °C. Because Line-of-Sight (LOS) displacement from InSAR alone is not directly interpretable in the longitudinal direction, a short-term in-situ campaign using a Linear Variable Differential Transformer (LVDT) at the main expansion joint is incorporated. This dataset validates the LOS-to-longitudinal displacement projection, enabling long-term thermal-movement tracking even after the ground-truth measurements end. Importantly, the framework is implemented entirely using open-source tools and processing chains, allowing the monitoring to be continuously updated with each new satellite acquisition rather than being limited to a one-off forensic analysis. The integrated system establishes a robust link between calibrated InSAR displacement measurements and thermal loading history, providing a validated operational method for early detection of abnormal thermal-response patterns and improving the management of thermally vulnerable bridge structures.
- 1 August 2026
- Published by NDT.net GmbH & Co. KG in e-Journal of Nondestructive Testing
- Vol. 31 (8)
Temperature-Induced Displacement Monitoring in Large-Span Bridges Using Multitemporal InSAR—A case study
Large-span balanced cantilever bridges experience significant thermally induced displacements, and insufficient expansion-joint capacity can lead to elevated internal stresses and long-term structural damage. Addressing this problem conventionally requires installing in-situ sensors, which provide high temporal resolution but are costly, intrusive, and limited in spatial coverage. This study presents a multitemporal Interferometric Synthetic Aperture Radar (InSAR)–based Structural Health Monitoring framework designed to capture and interpret these thermal displacements. A tailored spatial-filtering strategy is developed to address the difficulty of identifying coherent scatterers on slender bridge decks. These points are subsequently grouped by structural control nodes—piers and expansion joints—to isolate differential thermal responses across spans and cantilever segments. The framework is demonstrated on the Strängnäs Bridge in Sweden, which experiences large annual temperature fluctuations from –12 °C to 30 °C. Because Line-of-Sight (LOS) displacement from InSAR alone is not directly interpretable in the longitudinal direction, a short-term in-situ campaign using a Linear Variable Differential Transformer (LVDT) at the main expansion joint is incorporated. This dataset validates the LOS-to-longitudinal displacement projection, enabling long-term thermal-movement tracking even after the ground-truth measurements end. Importantly, the framework is implemented entirely using open-source tools and processing chains, allowing the monitoring to be continuously updated with each new satellite acquisition rather than being limited to a one-off forensic analysis. The integrated system establishes a robust link between calibrated InSAR displacement measurements and thermal loading history, providing a validated operational method for early detection of abnormal thermal-response patterns and improving the management of thermally vulnerable bridge structures.
- 5 September 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 25 (24)
Probabilistic Dynamic Design Curves Optimized for High-Speed Reinforced Concrete Railway Bridges Using First-Order Reliability Method
Increasing the operating speed of trains in modern railway networks can induce greater actions on the infrastructure than was previously the case. This is due, in particular, to the occurrence of the resonance phenomenon in railway bridges, which is the focus of this paper and was not traditionally considered as a concern. In this context, the vibrations experienced by bridges, both vertical accelerations and displacements, are limited by design regulations to ensure that the safety of train passages over bridges and the comfort of passengers are guaranteed. However, previous studies have shown that the conventional dynamic design methods do not always result in conservative designs, nor is the achieved safety always consistent. Therefore, a probabilistic approach is adopted in this study to optimize the cross-section properties of various railway bridges in a wide design range including section types, span lengths, and number of spans. For this purpose, an iterative line search-based optimization problem is formulated to minimize the thickness of the cross-sections under consideration and consequently the linear mass of the bridges. Meanwhile, the associated failure probabilities of the above dynamic limit states are constrained to be less than the desired level of safety by incorporating them into the optimization constraint. In this regard, First-Order Reliability Method (FORM) is adopted to perform reliability analyses. Thus, the obtained results are presented in the form of design curves that may assist designers to select minimum cross-section dimensions satisfying the desired level of safety in terms of dynamic limit states. This objective can be achieved using the proposed design curves without the need to construct associated complex computational models and perform computationally expensive dynamic analyses.
- 5 September 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 25 (24)
Probabilistic Dynamic Design Curves Optimized for High-Speed Reinforced Concrete Railway Bridges Using First-Order Reliability Method
Increasing the operating speed of trains in modern railway networks can induce greater actions on the infrastructure than was previously the case. This is due, in particular, to the occurrence of the resonance phenomenon in railway bridges, which is the focus of this paper and was not traditionally considered as a concern. In this context, the vibrations experienced by bridges, both vertical accelerations and displacements, are limited by design regulations to ensure that the safety of train passages over bridges and the comfort of passengers are guaranteed. However, previous studies have shown that the conventional dynamic design methods do not always result in conservative designs, nor is the achieved safety always consistent. Therefore, a probabilistic approach is adopted in this study to optimize the cross-section properties of various railway bridges in a wide design range including section types, span lengths, and number of spans. For this purpose, an iterative line search-based optimization problem is formulated to minimize the thickness of the cross-sections under consideration and consequently the linear mass of the bridges. Meanwhile, the associated failure probabilities of the above dynamic limit states are constrained to be less than the desired level of safety by incorporating them into the optimization constraint. In this regard, First-Order Reliability Method (FORM) is adopted to perform reliability analyses. Thus, the obtained results are presented in the form of design curves that may assist designers to select minimum cross-section dimensions satisfying the desired level of safety in terms of dynamic limit states. This objective can be achieved using the proposed design curves without the need to construct associated complex computational models and perform computationally expensive dynamic analyses.
- Open Access
- 25 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 89628-89646
Optimizing Structural Health Monitoring Systems Through Integrated Fog and Cloud Computing Within IoT Framework
In this paper, we propose the design, operation, and implementation of an Internet of Things based hybrid structural health monitoring. This innovative system leverages the capabilities of both fog and cloud layers in computing and monitoring. The system architecture consists of leaf nodes deployed on a target structure. These nodes, synchronously, collect acceleration signals from accelerometers attached directly to the structure and transmit the data to an on-site central node via short-range communication protocol. At the fog layer, the central node, applies damage detection algorithms on the collected data. If a damage is detected, it forwards the acceleration signals to a cloud-based monitoring server using cellular internet connectivity where more complex algorithms are used to identify and locate the damage. We provide detailed information about the design of the different system nodes, the implementation of damage detection algorithms, and the architecture of the monitoring server. To evaluate the effectiveness of the proposed system, several practical experiments were conducted. The results demonstrate that the hybrid system presented in this paper provides an efficient, reliable and cost-effective approach to damage detection and identification in civil infrastructures.
- 25 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 89628-89646
Open AccessOptimizing Structural Health Monitoring Systems Through Integrated Fog and Cloud Computing Within IoT Framework
In this paper, we propose the design, operation, and implementation of an Internet of Things based hybrid structural health monitoring. This innovative system leverages the capabilities of both fog and cloud layers in computing and monitoring. The system architecture consists of leaf nodes deployed on a target structure. These nodes, synchronously, collect acceleration signals from accelerometers attached directly to the structure and transmit the data to an on-site central node via short-range communication protocol. At the fog layer, the central node, applies damage detection algorithms on the collected data. If a damage is detected, it forwards the acceleration signals to a cloud-based monitoring server using cellular internet connectivity where more complex algorithms are used to identify and locate the damage. We provide detailed information about the design of the different system nodes, the implementation of damage detection algorithms, and the architecture of the monitoring server. To evaluate the effectiveness of the proposed system, several practical experiments were conducted. The results demonstrate that the hybrid system presented in this paper provides an efficient, reliable and cost-effective approach to damage detection and identification in civil infrastructures.
- Open Access
Image-Based Concrete Crack Detection Method Using the Median Absolute Deviation
This paper proposes an innovative approach for detecting and quantifying concrete cracks using an adaptive threshold method based on Median Absolute Deviation (MAD) in images. The technique applies limited pre-processing steps and then dynamically determines a threshold adapted for each sub-image depending on the greyscale distribution of the pixels, resulting in tailored crack segmentation. The edges of the crack are obtained using the Laplace edge detection method, and the width of the crack is obtained for each centreline point. The method’s performance is measured using the Probability of Detection (POD) curves as a function of the actual crack size, revealing remarkable capabilities. It was found that the proposed method could detect cracks as narrow as 0.1 mm, with a probability of 94% and 100% for cracks with larger widths. It was also found that the method has higher accuracy, precision, and F2 score values than the Otsu and Niblack methods.
Open AccessImage-Based Concrete Crack Detection Method Using the Median Absolute Deviation
This paper proposes an innovative approach for detecting and quantifying concrete cracks using an adaptive threshold method based on Median Absolute Deviation (MAD) in images. The technique applies limited pre-processing steps and then dynamically determines a threshold adapted for each sub-image depending on the greyscale distribution of the pixels, resulting in tailored crack segmentation. The edges of the crack are obtained using the Laplace edge detection method, and the width of the crack is obtained for each centreline point. The method’s performance is measured using the Probability of Detection (POD) curves as a function of the actual crack size, revealing remarkable capabilities. It was found that the proposed method could detect cracks as narrow as 0.1 mm, with a probability of 94% and 100% for cracks with larger widths. It was also found that the method has higher accuracy, precision, and F2 score values than the Otsu and Niblack methods.
- Open Access
- 24 November 2023
- Published by Elsevier in Probabilistic Engineering Mechanics
- Vol. 75
Surrogate-assisted investigation on influence of epistemic uncertainties on running safety of high-speed trains on bridges
- 24 November 2023
- Published by Elsevier in Probabilistic Engineering Mechanics
- Vol. 75
Open AccessSurrogate-assisted investigation on influence of epistemic uncertainties on running safety of high-speed trains on bridges
- Open Access
- 26 October 2023
- Published by Elsevier in Data in Brief
- Vol. 51, 109729
Dataset for damage detection retrieved from a monitored bridge pre and post verified damage
- 26 October 2023
- Published by Elsevier in Data in Brief
- Vol. 51, 109729
Open AccessDataset for damage detection retrieved from a monitored bridge pre and post verified damage
- Open Access
- 11 September 2023
- Published by Elsevier in Structures
- Vol. 57
An analytical solution of the maximum response of the coupled multiple parallel modulated pedestrian-bridge system
- 11 September 2023
- Published by Elsevier in Structures
- Vol. 57
Open AccessAn analytical solution of the maximum response of the coupled multiple parallel modulated pedestrian-bridge system
- Open Access
- 11 July 2023
- Published by Elsevier in Structures
- Vol. 55, 2249-2265
Quantification of the human–structure interaction effect through full-scale dynamic testing: The Folke Bernadotte Bridge
- 11 July 2023
- Published by Elsevier in Structures
- Vol. 55, 2249-2265
Open AccessQuantification of the human–structure interaction effect through full-scale dynamic testing: The Folke Bernadotte Bridge
- Open Access
- 1 July 2023
- Published by Walter de Gruyter GmbH in Nordic Concrete Research
- Vol. 68 (1) , 64-85
Assessment of Effective and Minimal Slab Widths for Evaluating the Shear Capacity of RC Overhang Slabs
The effective width is a relevant parameter for the design of bridge overhang slabs under concentrated loads. Experimental tests have been used to assess expressions for its calculation. However, the load capacity increases with the width until a transition area is reached. Test specimens may have lacked enough width to reach full shear capacity, affecting thus the evaluation of the results. On the other hand, within the transition area, a threshold value has been hypothesized to match the effective width. This paper aims to provide recommendations for minimal widths that guarantee the full capacity of overhang slabs and to assess the calculation of the effective width by means of the threshold value and other formulations. The effect of the edge beam is also considered. A campaign of validated non-linear FE-simulations based on experiments on range of width-span ratios was performed. The results suggest using a width-span ratio of at least 4.0 for slabs without an edge beam and 5.3 for slabs with an edge beam for the experimental practice. The efficiency of the formulation for the effective widths is diffuse and the use of threshold value leads to unsafe predictions. Instead, linear-elastic FE-analyses are recommended for the design practice.
- 1 July 2023
- Published by Walter de Gruyter GmbH in Nordic Concrete Research
- Vol. 68 (1) , 64-85
Open AccessAssessment of Effective and Minimal Slab Widths for Evaluating the Shear Capacity of RC Overhang Slabs
The effective width is a relevant parameter for the design of bridge overhang slabs under concentrated loads. Experimental tests have been used to assess expressions for its calculation. However, the load capacity increases with the width until a transition area is reached. Test specimens may have lacked enough width to reach full shear capacity, affecting thus the evaluation of the results. On the other hand, within the transition area, a threshold value has been hypothesized to match the effective width. This paper aims to provide recommendations for minimal widths that guarantee the full capacity of overhang slabs and to assess the calculation of the effective width by means of the threshold value and other formulations. The effect of the edge beam is also considered. A campaign of validated non-linear FE-simulations based on experiments on range of width-span ratios was performed. The results suggest using a width-span ratio of at least 4.0 for slabs without an edge beam and 5.3 for slabs with an edge beam for the experimental practice. The efficiency of the formulation for the effective widths is diffuse and the use of threshold value leads to unsafe predictions. Instead, linear-elastic FE-analyses are recommended for the design practice.