Mass transfer performance in pulsed disc and doughnut extraction columns
Open Access
- 1 September 2011
- journal article
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 28 (3) , 447-456
Abstract
Mass transfer performance is presented for a 76 mm diameter pulsed disc and doughnut extraction column for the toluene-acetone-water system. The experiments were carried out for both mass transfer directions. The mass transfer data are interpreted in terms of the axial diffusion model, thus accounting for continuous phase axial dispersion. The effect of operating parameters on the overall volumetric mass transfer coefficients has been investigated. The results show that the column performance increases with an increase in pulsation intensity. At high pulsation intensity, however, the overall volumetric mass transfer coefficient decreases due to the production of very fine dispersed droplets. It was also found that the column performance decreases with both an increase in dispersed phase velocity and a decrease in continuous phase velocity. An empirical correlation for prediction of the continuous phase overall mass transfer coefficient is derived in terms of the overall Sherwood number, Reynolds number and dispersed phase holdup for each mass transfer direction. The prediction of continuous phase overall mass transfer coefficients from the presented correlations is in good agreement with experimental dataKeywords
This publication has 13 references indexed in Scilit:
- Pulsed Disc‐and‐Doughnut Column PerformanceSolvent Extraction and Ion Exchange, 2009
- Process intensification with reactive extraction columnsChemical Engineering and Processing - Process Intensification, 2008
- Review Article: The Existing Models for Simulation of Pulsed and Reciprocating Columns—How Well do they Work in the Real World?Solvent Extraction and Ion Exchange, 2006
- Lagrangian simulations contribution to the knowledge of discs and doughnuts pulsed solvent extraction columns hydrodynamicsChemical Engineering and Processing - Process Intensification, 2003
- Correlations for Prediction of Mass Transfer Coefficients in Single Drop Systems and Liquid–Liquid Extraction ColumnsChemical Engineering Research and Design, 1999
- Simulation of flow hydrodynamics in a pulsed solvent extraction column under turbulent regimesChemical Engineering Journal, 1998
- CFD Contribution to a Design Procedure for Discs and Doughnuts Extraction ColumnsChemical Engineering Research and Design, 1998
- Numerical experimentation: a tool to calculate the axial dispersion coefficient in discs and doughnuts pulsed solvent extraction columnsChemical Engineering Science, 1997
- Influence of mass transfer direction on the operation of a pulsed sieve-plate pilot columnChemical Engineering Science, 1991
- Simulation of the flow patterns in a disc and doughnut columnThe Chemical Engineering Journal, 1990