Simple exact solutions for designing an optimal mechanical dynamic vibration absorber combined with a piezoelectric LR circuit based on the H∞, H2, or stability criterion
Authors:
Open Access
- 1 January 2021
- journal article
- research article
- Published by Japan Society of Mechanical Engineers in Mechanical Engineering Journal
- Vol. 8 (5) , 21-00189
Abstract
Multiplexing dynamic vibration absorbers (DVAs) provide better vibration control compared to that obtained with single-mass DVAs; however, their structure is more complicated and they are thus difficult to apply in practice. This paper proposes several optimal design formulas for an electromechanical DVA in which a mechanical single-mass DVA with a piezoelectric element between the primary and absorber masses and a series LR circuit is coupled to the element. The inductor and piezoelectric element act as a virtual mass and a virtual spring, respectively, and thus the circuit works as a kind of double-mass DVA. In the present study, such an electromechanical DVA was optimized based on three design criteria and its design formulas were derived. Such design formulas have been previously reported, but they are very long and impractical. In contrast, the proposed formulas are very simple and the optimal design conditions for a DVA can be easily obtained. The steady-state and free-vibration responses of a three-degree-of-freedom system with an optimized electromechanical DVA are compared with those of a vibratory system with a mechanical series-type double-mass DVA. It is confirmed that the electromechanical DVA exhibits exactly the same vibration suppression performance as that of the mechanical DVA.Keywords
This publication has 24 references indexed in Scilit:
- Enhancement of efficiency of vibration suppression using piezoelectric elements and LR circuit by amplification of electrical resonanceJournal of Sound and Vibration, 2014
- Dual-Functional Energy-Harvesting and Vibration Control: Electromagnetic Resonant Shunt Series Tuned Mass DampersJournal of Vibration and Acoustics, 2013
- Optimum tuning of series and parallel LR circuits for passive vibration suppression using piezoelectric elementsJournal of Sound and Vibration, 2010
- Robust Design Method of Multi Dynamic Vibration AbsorberTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2005
- Optimization of Two-Series-Mass Dynamic Vibration Absorber and Its Vibration Control PerformanceTRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 2003
- Closed-Form Solutions to the Exact Optimizations of Dynamic Vibration Absorbers (Minimizations of the Maximum Amplitude Magnification Factors)Journal of Vibration and Acoustics, 2002
- Design of a Dynamic Vibration Absorber for Minimization of Maximum Amplitude Magnification Factor. Derivation of Algebraic Exact Solution.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 1997
- Optimal Design Method for Multi Dynamic Absorber.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C, 1996
- Damping of structural vibrations with piezoelectric materials and passive electrical networksJournal of Sound and Vibration, 1991
- An Optimum Design Method for the Dual Dynamic Damper and its EffectivenessBulletin of JSME, 1984