Effects of Nb, V, Ti and Al on Recrystallisation/Precipitation Interaction in Microalloyed Steels
Authors:
- 12 January 2010
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 638-642, 3388-3393
Abstract
Recrystallisation/precipitation interaction in four steels having Nb, V, Ti, and Al, respectively, as microalloying elements has been studied by means of hot torsion tests. Remarkable differences were found in the results obtained for each steel. Nb and V-microalloyed steels presented long inhibition plateaus, but the steel with Al displayed a very short plateau. Finally the steel with Ti did not show plateau. This means that Nb and V precipitates (nitrides and carbides) can inhibit the static recrystallization but this does not happen for Al and Ti (which form nitrides). The difference between activation energies allows to predict the efficiency of different precipitates to strengthen the austenite during hot rolling. RPTT diagrams showed the interaction between both phenomena, along with the strain induced precipitation kinetics and precipitate coarsening. It is found that AlN particles nucleate and grow faster than NbCN or VN.Keywords
This publication has 8 references indexed in Scilit:
- Effects of aluminium and nitrogen on static recrystallisation in V-microalloyed steelsMaterials Science and Engineering: A, 2009
- Model for static recrystallisation critical temperature in microalloyed steelsMaterials Science and Technology, 2001
- Recrystallisation rates in austenite measured by double compression and stress relaxation methodsMaterials Science and Technology, 1998
- Recrystallization-induced Precipitation Interaction in a Medium Carbon Vanadium Microalloyed Steel.ISIJ International, 1997
- The influence of chemical composition on peak strain of deformed austenite in low alloy and microalloyed steelsActa Materialia, 1996
- Continuous-cooling-precipitation kinetics of Nb(CN) in high-strength low-alloy steelsMetallurgical Transactions A, 1992
- Modelling Microstructure and Its Effects during Multipass Hot Rolling.ISIJ International, 1992
- Computer Model for Prediction of Carbonitride Precipitation during Hot Working in Nb-Ti Bearing HSLA Steels.ISIJ International, 1992