Microstructural, Mechanical and Corrosion Performance of NbZr1-Ti64 Multi-Material Structure Fabricated via Wire Arc Directed Deposition
Preprint
- 14 August 2026
- preprint
- Published by MDPI AG in Preprints.org
Abstract
This study investigates the fabricability, microstructures, mechanical and corrosion behavior of multi-material structure (MMS) composed of niobium alloy (NbZr1) and titanium alloy (Ti64) using a wire-arc directed energy deposition process. The microstructure of NbZr1 alloy primarily consisted of equiaxed grains oriented in the rolling direction, while the deposited Ti64 microstructure exhibited ‘banding’ morphology and a basket weave structure composed of α phase lamellae in a β matrix. The MMS interface revealed good metallurgical bonding and was free from defects such as cracks, pores and intermetallic phases. Niobium diffusion from the NbZr1 into the Ti64 alloy resulted in formation (β-Ti + Nb) solid solution which imparted strength to the MMS. The hardness testing showed that microhardness values follow the trend: NbZr1 substrate > MMS interface > Ti64 deposit. The NbZr1–Ti64 multi-material structure developed in this study exhibited a balanced combination of ductility (22.73% elongation) and moderate tensile strength (254.18 MPa), outperforming most reported NbZr1-Ti64 MMS studies. All tensile specimens failed in ductile manner on NbZr1 side. The MMS demonstrated superior corrosion resistance, exhibiting the lowest corrosion current density and corrosion rate compared to its individual counterparts.Keywords
All Related Versions
- Version 1, 2026-08-14, Preprints
- Published version: Materials, 19 (18), 3959.
This publication has 40 references indexed in Scilit:
- A Study on Microstructure and Mechanical Properties of Electron Beam Welded Joint of Nb/Selective Laser-Melted TC4 Dissimilar AlloysJournal of Materials Engineering and Performance, 2024
- Refinement of Ti-6Al-4V prior-β grain structure in the as-deposited condition via process control during wire-direct energy depositionAdditive Manufacturing, 2023
- Investigations of Microstructure and Mechanical Properties in Wire + Arc Additively Manufactured Niobium–Zirconium AlloyAdvanced Engineering Materials, 2023
- The State of the Art for Wire Arc Additive Manufacturing Process of Titanium Alloys for Aerospace ApplicationsJournal of Materials Engineering and Performance, 2022
- Experimental Investigation on Microstructure and Mechanical Properties of Laser-Welded Nb-1% Zr-0.1% C AlloyJournal of Materials Engineering and Performance, 2021
- Additive Manufacturing Technologies2021
- Effect of heat input on microstructure and mechanical properties of pulsed laser welded joints in Ti6Al4V/Nb dissimilar alloysThe International Journal of Advanced Manufacturing Technology, 2017
- Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl SolutionMetallurgical and Materials Transactions A, 2017
- Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4VMetallurgical and Materials Transactions A, 2012
- Corrosion Books: Electrochemical Techniques in Corrosion Science and Engineering. By: R. G. Kelly, J.R. Scully, D.W. Shoesmith, R.G. Buchheit.Materials and Corrosion, 2006