It is possible to determine the properties of the layered media such as snow, soil etc. using acoustic reflectometry in non-invasive manner. These media normally contain layers that have different physical properties like the amount of moisture, porosity, density, etc. Stratigraphy is useful in areas like determination of the water content of snow, density of soil, etc. Researchers have demonstrated that acoustic techniques which are non-invasive can be used to determine the properties of media layers. However, a systematic hardware design approach for these acoustic techniques is not available in the literature. The approach to determine the required specifications of various components like transmitting and receiving transducers, battery etc. are not discussed in the literature. A complete hardware system design for acoustic reflectometry is presented, in this paper. The each aspect of the design like selection of transducers based of requirements, bandwidth of the probe signal, power requirements etc. has been thoroughly discussed in the paper.