Rajendar Bahl
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rajendar Bahl has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Arun Kumar
Deputy Editor-in-Chief, IETE Journal of Research
4 shared publications - Mohd Wajid
Department of Electronics Engineering, AMU, Aligarh, India
2 shared publications - A. K. Pattnaik
Wetland International South Asia, New Delhi, India
1 shared publication - Arun Goel
Indian Inst Technol Kanpur, Elect Dept, Kanpur 208016, India
1 shared publication - Balaji Sundar Rajan
Department of Electrical Communication Engineering, Indian Institute of Science, Bengaluru, India
1 shared publication Bipin Kumar
Centre for Applied Research in Electronics, Indian Institute of Technology Delhi,New Delhi,India,110016
1 shared publication
Latest Publications
- Open Access
- 26 January 2024
- Published by Association for Computing Machinery (ACM)
- p. 122-126
Attention based Convolutional Neural Network for Active Noise Control
Active noise control (ANC) is a technology that uses sound waves to reduce or eliminate unwanted ambient noise in a given environment. We approached ANC using a deep neural network consisting of convolutional and attention layers, followed by deconvolutional layers. The proposed deep learning model processes the acoustic signal samples in frames. A piece-wise non-linear function is employed to represent the secondary path and loudspeaker saturation non-linearies. To assess the efficacy of the proposed model, we conducted tests using filtered white noise across different frequency bands and various tonals from a diverse database. The proposed convolutional model with attention layers yields a normalized mean square error (NMSE) recuction of upto 3 dB more as compared to that achieved using just convolutional model. Experiment results are presented for both confined and anechoic environments, providing a comprehensive evaluation of the proposed ANC approach.
- 26 January 2024
- Published by Association for Computing Machinery (ACM)
- p. 122-126
Open AccessAttention based Convolutional Neural Network for Active Noise Control
Active noise control (ANC) is a technology that uses sound waves to reduce or eliminate unwanted ambient noise in a given environment. We approached ANC using a deep neural network consisting of convolutional and attention layers, followed by deconvolutional layers. The proposed deep learning model processes the acoustic signal samples in frames. A piece-wise non-linear function is employed to represent the secondary path and loudspeaker saturation non-linearies. To assess the efficacy of the proposed model, we conducted tests using filtered white noise across different frequency bands and various tonals from a diverse database. The proposed convolutional model with attention layers yields a normalized mean square error (NMSE) recuction of upto 3 dB more as compared to that achieved using just convolutional model. Experiment results are presented for both confined and anechoic environments, providing a comprehensive evaluation of the proposed ANC approach.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 361-365
Direction of Arrival Estimation with Uniform Linear Array based on Recurrent Neural Network
This paper proposes the direction of arrival (DOA) estimation of an acoustic source based on a recurrent neural network (RNN) with a uniform linear array (ULA). The RNN has been trained using a large number of independent realizations of microphones signal of the ULA. The authors have compared the DOA estimation accuracy of RNN model against the standard algorithm i.e. delay and sum (DAS) beamformer and it has been observed that RNN based DOA estimation outperforms the DAS beamformer.
- 1 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 361-365
Direction of Arrival Estimation with Uniform Linear Array based on Recurrent Neural Network
This paper proposes the direction of arrival (DOA) estimation of an acoustic source based on a recurrent neural network (RNN) with a uniform linear array (ULA). The RNN has been trained using a large number of independent realizations of microphones signal of the ULA. The authors have compared the DOA estimation accuracy of RNN model against the standard algorithm i.e. delay and sum (DAS) beamformer and it has been observed that RNN based DOA estimation outperforms the DAS beamformer.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Capacity Analysis of Indoor Visible Light Communication Systems
This paper focuses on a dimmable visible light communication (VLC) system using PIN photodiode. The system is based on Intensity modulation with direct detection (IM/DD). In such a system, the channel gain is often based on Lambertian radiation pattern of the transmitting Light Emitting Diode (LED), which directly changes with several related geometrical parameters. In literature, it is often assumed that the primary impairment is caused by additive Gaussian noise. However, due to the random nature of photon emission in the lighting source, noise variance depends on the current signal strength. So, to better reflect the physical properties of the VLC, we have considered Line of Sight (LOS) input dependent Gaussian noise channel. Under the non-negativity, peak power, and average power constraint, the lower bounds on the point-to-point (P2P) capacity is derived. The lower bound is obtained based on the fact that the differential entropy of the channel output is greater than the differential entropy of the channel input. Simulation results demonstrate that the capacity of the VLC system varies with the spatial location of the transmitter and receiver.
- 1 June 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Capacity Analysis of Indoor Visible Light Communication Systems
This paper focuses on a dimmable visible light communication (VLC) system using PIN photodiode. The system is based on Intensity modulation with direct detection (IM/DD). In such a system, the channel gain is often based on Lambertian radiation pattern of the transmitting Light Emitting Diode (LED), which directly changes with several related geometrical parameters. In literature, it is often assumed that the primary impairment is caused by additive Gaussian noise. However, due to the random nature of photon emission in the lighting source, noise variance depends on the current signal strength. So, to better reflect the physical properties of the VLC, we have considered Line of Sight (LOS) input dependent Gaussian noise channel. Under the non-negativity, peak power, and average power constraint, the lower bounds on the point-to-point (P2P) capacity is derived. The lower bound is obtained based on the fact that the differential entropy of the channel output is greater than the differential entropy of the channel input. Simulation results demonstrate that the capacity of the VLC system varies with the spatial location of the transmitter and receiver.
- 1 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 236-241
A Systematic Approach of Hardware Design for Acoustic Reflectometry System
It is possible to determine the properties of the layered media such as snow, soil etc. using acoustic reflectometry in non-invasive manner. These media normally contain layers that have different physical properties like the amount of moisture, porosity, density, etc. Stratigraphy is useful in areas like determination of the water content of snow, density of soil, etc. Researchers have demonstrated that acoustic techniques which are non-invasive can be used to determine the properties of media layers. However, a systematic hardware design approach for these acoustic techniques is not available in the literature. The approach to determine the required specifications of various components like transmitting and receiving transducers, battery etc. are not discussed in the literature. A complete hardware system design for acoustic reflectometry is presented, in this paper. The each aspect of the design like selection of transducers based of requirements, bandwidth of the probe signal, power requirements etc. has been thoroughly discussed in the paper.
- 1 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 236-241
A Systematic Approach of Hardware Design for Acoustic Reflectometry System
It is possible to determine the properties of the layered media such as snow, soil etc. using acoustic reflectometry in non-invasive manner. These media normally contain layers that have different physical properties like the amount of moisture, porosity, density, etc. Stratigraphy is useful in areas like determination of the water content of snow, density of soil, etc. Researchers have demonstrated that acoustic techniques which are non-invasive can be used to determine the properties of media layers. However, a systematic hardware design approach for these acoustic techniques is not available in the literature. The approach to determine the required specifications of various components like transmitting and receiving transducers, battery etc. are not discussed in the literature. A complete hardware system design for acoustic reflectometry is presented, in this paper. The each aspect of the design like selection of transducers based of requirements, bandwidth of the probe signal, power requirements etc. has been thoroughly discussed in the paper.
- 1 May 2016
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 139 (5) , 2815-2832
Design and analysis of air acoustic vector-sensor configurations for two-dimensional geometry
Acoustic vector-sensors (AVS) have been designed using the P-P method for different microphone configurations. These configurations have been used to project the acoustic intensity on the orthogonal axes through which the direction of arrival (DoA) of a sound source has been estimated. The analytical expressions for the DoA for different microphone configurations have been derived for two-dimensional geometry. Finite element method simulation using COMSOL-Multiphysics has been performed, where the microphone signals for AVS configurations have been recorded in free field conditions. The performance of all the configurations has been evaluated with respect to angular error and root-mean-square angular error. The simulation results obtained with ideal geometry for different configurations have been corroborated experimentally with prototype AVS realizations and also compared with microphone-array method, viz., Multiple Signal Classification and Generalized Cross Correlation. Experiments have been performed in an anechoic room using different prototype AVS configurations made from small size microphones. The DoA performance using analytical expressions, simulation studies, and experiments with prototype AVS in anechoic chamber are presented in the paper. The square and delta configurations are found to perform better in the absence and presence of noise, respectively.
- 1 May 2016
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 139 (5) , 2815-2832
Design and analysis of air acoustic vector-sensor configurations for two-dimensional geometry
Acoustic vector-sensors (AVS) have been designed using the P-P method for different microphone configurations. These configurations have been used to project the acoustic intensity on the orthogonal axes through which the direction of arrival (DoA) of a sound source has been estimated. The analytical expressions for the DoA for different microphone configurations have been derived for two-dimensional geometry. Finite element method simulation using COMSOL-Multiphysics has been performed, where the microphone signals for AVS configurations have been recorded in free field conditions. The performance of all the configurations has been evaluated with respect to angular error and root-mean-square angular error. The simulation results obtained with ideal geometry for different configurations have been corroborated experimentally with prototype AVS realizations and also compared with microphone-array method, viz., Multiple Signal Classification and Generalized Cross Correlation. Experiments have been performed in an anechoic room using different prototype AVS configurations made from small size microphones. The DoA performance using analytical expressions, simulation studies, and experiments with prototype AVS in anechoic chamber are presented in the paper. The square and delta configurations are found to perform better in the absence and presence of noise, respectively.
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Long-term real-time monitoring system for Ganges river dolphins using two sets of 6-hydrophone array systems
The authors have been developing an acoustic observation system that can record the high-frequency bio-sonar clicks of Ganges river dolphins and can estimate their 3D location in real time. In order to expand the coverage of the acoustic measurement, we deployed and installed one more hydrophone array system about 100 meters away from the original observation system. Combining the measurement results of the two array systems, we successfully obtained improved estimates of acoustic positions of the sound source compared to using a single standalone measurement.
- 1 June 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Long-term real-time monitoring system for Ganges river dolphins using two sets of 6-hydrophone array systems
The authors have been developing an acoustic observation system that can record the high-frequency bio-sonar clicks of Ganges river dolphins and can estimate their 3D location in real time. In order to expand the coverage of the acoustic measurement, we deployed and installed one more hydrophone array system about 100 meters away from the original observation system. Combining the measurement results of the two array systems, we successfully obtained improved estimates of acoustic positions of the sound source compared to using a single standalone measurement.
- 1 May 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Acoustic Survey Of Irrawaddy Dolphin Populations In Chilika Lagoon: First Test Of A Compact High-Resolution Device
Irrawaddy dolphins (Orcaella brevirostris) being on top of the food chain are considered as a flagship species of Chilika. These cetaceans produce characteristic echolocation pulses that make them acoustically visible, night or day. Acoustic-based survey methods are found to be indispensable for surveying porpoises and dolphins in coastal precincts. This paper reports the first such collaborative attempt in Chilika by applying acoustic survey technology based on the design of an innovative compact and portable acoustic survey device designed for observation of groups of small cetaceans. The acoustic sensor system is housed in a "bird-cage" structure containing 3 hydrophones forming a main linear array, together with two more hydrophones forming a small 3-element triangle array with the central hydrophone, in a plane perpendicular to the linear array axis. It weighs 25 kg and is 3.6 m long, 30 cm in diameter, and can be deployed either vertically or horizontally with buoys and a weight. A high-speed multichannel data acquisition system records the dolphin click sounds from all hydrophones. Signal processing algorithms have been developed for automatic detection and discrimination of echolocation clicks from other underwater sounds, localization of sound sources, and tracking individual animals. The device has previously been tested in vertical mode in a quasi-natural environment with a group of bottlenose dolphins that has confirmed its capability to precisely track several vocalizing animals. The depth of the Chilika lagoon in the dolphin habitat can be as shallow as 1.5 m. Thus, the array has to be deployed in horizontal mode, which enables it to provide very good lateral resolution in the broadside direction. This paper reports the first results of using this array in shallow water conditions. Movements of several Irrawaddy dolphins have been observed very clearly.
- 1 May 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Acoustic Survey Of Irrawaddy Dolphin Populations In Chilika Lagoon: First Test Of A Compact High-Resolution Device
Irrawaddy dolphins (Orcaella brevirostris) being on top of the food chain are considered as a flagship species of Chilika. These cetaceans produce characteristic echolocation pulses that make them acoustically visible, night or day. Acoustic-based survey methods are found to be indispensable for surveying porpoises and dolphins in coastal precincts. This paper reports the first such collaborative attempt in Chilika by applying acoustic survey technology based on the design of an innovative compact and portable acoustic survey device designed for observation of groups of small cetaceans. The acoustic sensor system is housed in a "bird-cage" structure containing 3 hydrophones forming a main linear array, together with two more hydrophones forming a small 3-element triangle array with the central hydrophone, in a plane perpendicular to the linear array axis. It weighs 25 kg and is 3.6 m long, 30 cm in diameter, and can be deployed either vertically or horizontally with buoys and a weight. A high-speed multichannel data acquisition system records the dolphin click sounds from all hydrophones. Signal processing algorithms have been developed for automatic detection and discrimination of echolocation clicks from other underwater sounds, localization of sound sources, and tracking individual animals. The device has previously been tested in vertical mode in a quasi-natural environment with a group of bottlenose dolphins that has confirmed its capability to precisely track several vocalizing animals. The depth of the Chilika lagoon in the dolphin habitat can be as shallow as 1.5 m. Thus, the array has to be deployed in horizontal mode, which enables it to provide very good lateral resolution in the broadside direction. This paper reports the first results of using this array in shallow water conditions. Movements of several Irrawaddy dolphins have been observed very clearly.
- 1 January 1995
- Published by Springer Nature
- p. 801-809
Segmentation of Multispectral Sonar Images