Power sharing in WEST double-null plasmas
Open Access
- 12 March 2026
- journal article
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (5)
Abstract
This study investigates L-mode power sharing between divertor target plates in Double-Null (DN) magnetic configuration on the WEST tokamak. A series of discharges scanning the distance between the separatrices at the outer mid-plane ($\delta R_{sep}$) were analyzed using Langmuir probes, embedded fiber Bragg gratings, and calorimetry to characterize heat flux profiles and total deposited power in attached regime. Results show that DN configurations could significantly reduce the peak heat flux measured by fiber Bragg gratings on the lower divertor by over 70\% compared to LSN as power is more evenly distributed between upper and lower divertors. However, the heat flux is shown to be highly sensitive (peak value multiplied by 2) to millimetric variations of the $\delta R_{sep}$. These findings reinforce the DN configuration's potential for mitigating peak heat loads in next step fusion devices, while highlighting the need for precise magnetic control in attached regime. Power deposition remains asymmetric in connected DN, with up to 89\% of power directed to outer targets and 68\% to the lower divertor, consistent with the ballooned nature of radial transport at the low-field side and downward $\pmb{B} \times \pmb{\nabla} B$ drift effects. To quantify these effects, we develop a revised power sharing model building on Brunner’s formulation, incorporating localized sources at the inner ($S_i$) and outer ($S_o$) mid-plane, a vertical drift bias $b$, and a cooling factor $\kappa_{\text{diss}}$. The best-fit parameters suggest that approximately 58\% of the exhaust power preferentially flows downward due to vertical drifts, and that a secondary inner mid-plane source contributes up to 13\% of the total power in WEST. The decay lengths obtained from the fit are in agreement with those independently measured from heat flux profiles, further validating the model.
Keywords
Funding Information
- EUROfusion (101052200)
This publication has 92 references indexed in Scilit:
- Introducing electromagnetic effects in Soledge3XContributions to Plasma Physics, 2024
- Surface heat flux estimation with embedded thermocouples and Fiber Bragg Grating sensor in ITER-like plasma facing componentsFusion Engineering and Design, 2023
- Design and integration of femtosecond Fiber Bragg gratings temperature probes inside actively cooled ITER-like plasma-facing componentsFusion Engineering and Design, 2021
- Flush-mounted Langmuir probes in the WEST tokamak divertorFusion Engineering and Design, 2021
- An overview of the numerical methods for tokamak plasma equilibrium computation implemented in the NICE codeFusion Engineering and Design, 2020
- First heat flux estimation in the lower divertor of WEST with embedded thermal measurementsFusion Engineering and Design, 2019
- Heating and current drive actuators study for FNSF in the ion cyclotron and lower hybrid range of frequencyFusion Engineering and Design, 2018
- The DTT device: Role and objectivesFusion Engineering and Design, 2017
- ARC: A compact, high-field, fusion nuclear science facility and demonstration power plant with demountable magnetsFusion Engineering and Design, 2015
- Parallel SOL flow on TCVJournal of Nuclear Materials, 2007