Non-isolated bidirectional DC-DC converters (BDCs) are essential for efficient power flow management in energy storage systems, DC microgrids (DC-MGs), electric vehicles (EVs), and industrial electronics applications. However, most existing topologies are limited by narrow duty cycle ranges, high component counts, increased cost, bulky structures, and elevated voltage stress while achieving the required voltage gain. To address these issues, this paper presents a three-port non-isolated high-gain BDC designed for renewable energy, energy storage, and DC-MG integration. The proposed converter supports multiple power flow paths, including battery-to-DC-MG, photovoltaic (PV)-to-both battery and DC-MG, PV-to-DC-MG, and DC-MG-to-battery. It operates in boost mode during power transfer from the PV source to the battery and DC-MG, and from the battery to the DC-MG, while functioning in buck mode when power flows from the DC-MG to the battery. The topology achieves a wide voltage conversion ratio with low voltage stress across most switches, improving both efficiency and reliability. A 200 W experimental prototype employing SiC MOSFETs was developed and tested. The converter demonstrated stable operation under both open-loop and closed-loop modes, achieving a peak experimental efficiency of 95.8%. Furthermore, it can operate in continuous (CCM) and discontinuous conduction modes (DCM), confirming its flexibility and robustness under varying conditions.