A liquid metal based, integrated parallel electroosmotic micropump cluster drive system
- 11 January 2024
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Lab on a Chip
- Vol. 24 (4) , 896-903
Abstract
The application of liquid metal in a microfluidic system enables the fabrication of highly integrated on-chip electroosmotic micropumps (EOPs). In this work, a low-voltage driveable integrated parallel EOP cluster drive system is proposed. This system consists of two layers, a branch-channel layer and a trunk-channel layer. The lower branch-channel layer contains separate parallel pumping channels and a pair of comb liquid metal electrodes. The separated branch channels are connected together through the trunk channels in the upper layer. With this structural arrangement, the parallel micropumps form an integrated micropump cluster for larger pumping capacity. The distance between the pumping channel and the electrode next to it is controlled to 20 μm. To guide the pump design, parametric studies are performed and fully discussed. According to the experimental results, the micropump cluster can be driven at a low voltage of 0.5 V, and the flow rate reaches 274 nL min−1 at 5 V. In addition, the paper finally proposes an electrode protection strategy and an integrated pump-valve drive system which is expected to solve the shortcoming of electroosmotic pumps in terms of long-time storage and driving.Keywords
Funding Information
- National Key Research and Development Program of China (2019YFB2204903)
- State Grid Corporation of China (5700-202155453A-0-0-00)
This publication has 41 references indexed in Scilit:
- Detecting zeta potential of polydimethylsiloxane (PDMS) in electrolyte solutions with atomic force microscopeJournal of Colloid and Interface Science, 2020
- A Multichannel Electroosmotic Flow Pump Using Liquid Metal ElectrodesBioChip Journal, 2019
- Review: Electric field driven pumping in microfluidic deviceElectrophoresis, 2017
- A microfabricated electroosmotic pump coupled to a gas-diffusion microchip for flow injection analysis of ammoniaMicrochimica Acta, 2014
- Evaluation of polydimethylsiloxane (PDMS) surface modification approaches for microfluidic applicationsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2012
- Formation of Arrayed Droplets by Soft Lithography and Two‐Phase Fluid Flow, and Application in Protein CrystallizationAdvanced Materials, 2004
- Low‐voltage electroosmosis pump for stand‐alone microfluidics devicesElectrophoresis, 2003
- Fabrication of microfluidic systems in poly(dimethylsiloxane)Electrophoresis, 1999
- Applications of the Zeta Potential1981
- Bemerkungen zu der Abhandlung der HH. Weselsky und Benedikt „Ueber einige Azoverbindungen”︁European Journal of Inorganic Chemistry, 1879