Aerodynamic device for generating mono-disperse fuel droplets
Authors:
- 1 April 1989
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 60 (4) , 646-652
Abstract
A device has been developed for generating well-defined, one-dimensional streams of small (200–1000 μm), mono-sized droplets of a variety of fuels. The droplets produced are well separated (>30 droplet diameters), making this technique well suited to experimental combustion studies of unsupported, isolated droplets. This method has been used successfully to generate droplets of light and mid-distillate petroleum fuels, heavy oils, boron/JP-10 slurries, and coke/oil slurries, for a range of combustion studies. The principle of operation of the device is the aerodynamic stripping of incompletely formed droplets emerging from the tip of a capillary/fine wire which resides in the throat of a venturi or convergent nozzle. By varying the fuel flow rate through the capillary, the gas flow rate through the nozzle, and the diameter of the capillary, precise control of the initial droplet size, spacing, frequency, and velocity can be achieved. Design criteria, exemplary results, and a brief survey of other droplet generating schemes are presented, along with a description of the integration of this device into a laboratory combustion apparatus.Keywords
This publication has 15 references indexed in Scilit:
- Combustion and microexplosion of freely falling multicomponent dropletsCombustion and Flame, 1984
- Coke Formation in the Combustion of Isolated Heavy Oil DropletsCombustion Science and Technology, 1984
- Microdroplet mixing for rapid reaction kinetics with Raman spectrometric detectionAnalytical Chemistry, 1983
- Burning times of linear fuel droplet arrays: A comparison of experiment and theoryCombustion and Flame, 1982
- Simple and Inexpensive Design for an Isolated Droplet Generator Useful in Studies of Atomization in FlamesApplied Spectroscopy, 1981
- Combustion and Agglomeration of Coal-Oil Mixtures in Furnace EnvironmentsCombustion Science and Technology, 1980
- Initial Observations on the Free Droplet Combustion Characteristics of Water-In-Fuel Emulsions†Combustion Science and Technology, 1979
- A Theoretical and Experimental Investigation of the Ignition of Fuel DropletsCombustion Science and Technology, 1977
- Generation of monodisperse aerosol standardsEnvironmental Science & Technology, 1973
- A Microburette for Producing Small Liquid Drops of Known SizeJournal of Scientific Instruments, 1947