Joint Effects of Virtual Surfaces on Anti-Icing and Drag Reduction
- 1 April 2025
- journal article
- research article
- Published by American Institute of Aeronautics and Astronautics (AIAA) in AIAA Journal
- Vol. 63 (4) , 1502-1511
Abstract
The operation of the anti-icing system of an airplane can modulate its aerodynamics, whilst an aerodynamic control can alter the icing condition. Therefore, one well-designed control strategy can be expected to yield two benefits, which, however, has not been actively investigated. In this work, the constant leading-edge blowing technique is deployed to achieve joint effects on anti-icing and drag reduction, first on an airfoil and then on a half-airplane model. The results indicate that dual virtual surfaces (an inner one and an outer one) wrapping the leading edge are generated by the blowing control. The inner one prevents water droplets from impacting and accumulating on the airfoil by changing their trajectories. The outer one redirects the shear generated by the blowing and promotes its rolling up and vortex shedding, generating low-pressure zones around the upper leading edge and subsequently reducing drag significantly.Keywords
Funding Information
- National Natural Science Foundation of China (12202059, 92152109)
This publication has 31 references indexed in Scilit:
- Minimizing airfoil drag at low angles of attack with DBD-based turbulent drag reduction methodsChinese Journal of Aeronautics, 2022
- Cluster-based feedback control of turbulent post-stall separated flowsJournal of Fluid Mechanics, 2019
- Active control of circular cylinder flow with windward suction and leeward blowingExperiments in Fluids, 2019
- Global effect of local skin friction drag reduction in spatially developing turbulent boundary layerJournal of Fluid Mechanics, 2016
- On determining characteristic length scales in pressure-gradient turbulent boundary layersPhysics of Fluids, 2016
- Sensitivity of forces to wall transpiration in flow past an aerofoilProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2015
- A hybrid RANS-LES approach with delayed-DES and wall-modelled LES capabilitiesInternational Journal of Heat and Fluid Flow, 2008
- The ULTIMATE conservative difference scheme applied to unsteady one-dimensional advectionComputer Methods in Applied Mechanics and Engineering, 1991
- ENHANCEMENTS OF THE SIMPLE METHOD FOR PREDICTING INCOMPRESSIBLE FLUID FLOWSNumerical Heat Transfer, 1984
- A theory of circulation control by slot-blowing, applied to a circular cylinderJournal of Fluid Mechanics, 1968