The Design of Distance-Warning and Brake Pressure Control Systems Incorporating LiDAR Technology for Use in Autonomous Vehicles
Open Access
- 13 December 2024
- journal article
- research article
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 15 (12) , 576
Abstract
This research presents the design of a brake fluid pressure warning and control system for autonomous vehicles (AVs) used on university campuses to control brake fluid pressure and measure the proximity of objects or obstacles in front of the vehicles using LiDAR. The goal was to reduce the jerking of the vehicle caused by the conventional braking system, which may cause danger to the user. We initially changed the existing brake system, which uses human braking force, to electric motor braking and tested it in a closed area (a test track) before actual use. This research was divided into two parts: Part 1—using LiDAR to create warnings in case there are obstacles in front of the vehicle and Part 2—controlling brake fluid pressure using a linear motor and a PD controller. Under the test conditions employed, at a speed of 20 km/h, the total load of passengers is 600 kg. The design results regarding the PD controller with the most suitable values of the system that prevent the vehicle from jerking are KD = 27.9606 and KP = 32.0490. The test was conducted while an object crossed the vehicle’s path at distances of 5, 10, 15, and 20 m, respectively. It was found that controlling brake fluid pressure by measuring the distance from the object helped reduce the braking time and jerking of the vehicle and could stop the vehicle before experiencing a collision. At a distance of 20 m, the vehicle could be stopped before the crash and was 3.7 m away from the object; at a distance of 15 m, the distance from the object was 3.1 m; and at a distance of 10 m, the distance from the object was 3 m. However, at a distance of 5 m, the brake system could not stop the vehicle, causing collision with the object because the distance from the object for braking was less than the designed distance. This shows that the warning system and the brake fluid pressure control system can operate in accordance with the corresponding conditions correctly, smoothly, and quickly within the specified distance and be applied to other types of vehicles.Keywords
This publication has 29 references indexed in Scilit:
- The Simulation of APM Operations: A Case Study of Suvarnabhumi AirportJournal of Advances in Information Technology, 2024
- A Polytopic Model-Based Robust Predictive Control Scheme for Path Tracking of Autonomous VehiclesIEEE Transactions on Intelligent Vehicles, 2023
- Improving road safety with ensemble learning: Detecting driver anomalies using vehicle inbuilt camerasMachine Learning with Applications, 2023
- Improvement of road safety management systems of local governments in Korea after evaluating related indicatorsAccident Analysis & Prevention, 2023
- A design method for booster motor of brake-by-wire system based on intelligent electric vehicleGreen Energy and Intelligent Transportation, 2023
- Understanding the potential of emerging digital technologies for improving road safetyAccident Analysis & Prevention, 2022
- Automotive LiDAR Technology: A SurveyIEEE Transactions on Intelligent Transportation Systems, 2021
- A Mechatronic Brake Booster for Electric Vehicles: Design, Control, and ExperimentIEEE Transactions on Vehicular Technology, 2020
- An investigation on braking systems used in railway vehiclesEngineering Science and Technology, an International Journal, 2020
- Study on braking stability of commercial vehicles: An optimized air brake systemAdvances in Mechanical Engineering, 2019