Influence of Two‐Step Heat Treatments on Microstructure and Mechanical Properties of a β‐Solidifying Titanium Aluminide Alloy Fabricated via Electron Beam Powder Bed Fusion
Open Access
- 21 October 2022
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 25 (2)
Abstract
Additive manufacturing technologies, particularly electron beam powder bed fusion (PBF‐EB/M), are becoming increasingly important for the processing of intermetallic titanium aluminides. This study presents the effects of hot isostatic pressing (HIP) and subsequent two‐step heat treatments on the microstructure and mechanical properties of the TNM‐B1 alloy (Ti–43.5Al–4Nb–1Mo–0.1B) fabricated via PBF‐EB/M. Adequate solution heat treatment temperatures allow the adjustment of fully lamellar (FL) and nearly lamellar (NL‐β) microstructures. The specimens are characterized by optical microscopy and scanning electron microscopy (SEM), X‐ray computed tomography (CT), X‐ray diffraction (XRD), and electron backscatter diffraction (EBSD). The mechanical properties at ambient temperatures are evaluated via tensile testing and subsequent fractography. While lack‐of‐fusion defects are the main causes of failure in the as‐built condition, the mechanical properties in the heat‐treated conditions are predominantly controlled by the microstructure. The highest ultimate tensile strength is achieved after HIP due to the elimination of lack‐of‐fusion defects. The results reveal challenges originating from the PBF‐EB/M process, for example, local variations in chemical composition due to aluminum evaporation, which in turn affect the microstructures after heat treatment. For designing suitable heat treatment strategies, particular attention should therefore be paid to the microstructural characteristics associated with additive manufacturing.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (404665753, 406109547)
This publication has 46 references indexed in Scilit:
- Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam meltingMaterials Science and Engineering: A, 2015
- Selective electron beam melting of Ti–48Al–2Nb–2Cr: Microstructure and aluminium lossIntermetallics, 2014
- Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloyIntermetallics, 2014
- Design, Processing, Microstructure, Properties, and Applications of Advanced Intermetallic TiAl AlloysAdvanced Engineering Materials, 2012
- Microstructure development and hardness of a powder metallurgical multi phase γ-TiAl based alloyIntermetallics, 2012
- Microstructure evolution and mechanical properties of an intermetallic Ti-43.5Al-4Nb-1Mo-0.1B alloy after ageing below the eutectoid temperatureInternational Journal of Materials Research, 2011
- Electron beam melting of Ti–48Al–2Cr–2Nb alloy: Microstructure and mechanical properties investigationIntermetallics, 2011
- Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam meltingActa Materialia, 2010
- Rietveld texture analysis from diffraction imagesZeitschrift für Kristallographie Supplements, 2007
- Texture, residual stress and structural analysis of thin films using a combined X-ray analysisThin Solid Films, 2004