Rapid prototyping of a novel and flexible paper based oxygen sensing patchviaadditive inkjet printing process
Open Access
- 23 July 2019
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (39) , 22695-22704
Abstract
A novel and flexible oxygen sensing patch was successfully developed for wearable, industrial, food packaging, pharmaceutical and biomedical applications using a cost-efficient and rapid prototypable additive inkjet print manufacturing process. An oxygen sensitive ink was formulated by dissolving ruthenium dye and ethyl cellulose polymer in ethanol in a 1 : 1 : 98 (w/w/w) ratio. The patch was fabricated by depositing the oxygen sensitive ink on a flexible parchment paper substrate using an inkjet printing process. A maximum absorbance from 430 nm to 480 nm and a fluorescence of 600 nm was observed for the oxygen sensitive ink. The capability of the oxygen sensitive patch was investigated by measuring the fluorescence quenching lifetime of the printed dye for varying oxygen concentration levels. A fluorescence lifetime decay (τ) from ≈4 μs to ≈1.9 μs was calculated for the printed oxygen sensor patch, for oxygen concentrations varying from ≈5 mg L−1 to ≈25 mg L−1. A sensitivity of 0.11 μs mg L−1 and a correlation coefficient of 0.9315 was measured for the printed patches. The results demonstrated the feasibility of employing an inkjet printing process for the rapid prototyping of flexible and moisture resistant oxygen sensitive patches which facilitates a non-invasive method for monitoring oxygen and its concentration levels.Keywords
Funding Information
- Air Force Research Laboratory (FA8650-15-2-5401)
This publication has 39 references indexed in Scilit:
- Optical fiber oxygen sensor based on Pd(II) complex embedded in sol–gel matrixJournal of Luminescence, 2013
- A NIR luminescent copolymer based on platinum porphyrin as high permeable dissolved oxygen sensor for microbioreactorsAIChE Journal, 2013
- Aerosol Jet Printed, Low Voltage, Electrolyte Gated Carbon Nanotube Ring Oscillators with Sub-5 μs Stage DelaysNano Letters, 2013
- Fabrication of platinum-decorated single-walled carbon nanotube based hydrogen sensors by aerosol jet printingNanotechnology, 2012
- Detection of heavy metal compounds using a novel inkjet printed surface enhanced Raman spectroscopy (SERS) substrateSensors and Actuators B: Chemical, 2012
- Tactile sensing for dexterous in-hand manipulation in robotics—A reviewSensors and Actuators A: Physical, 2011
- Encapsulation of tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) complex linked with dendrons in sol–gels: Stable optical sensing membranes for dissolved oxygenTalanta, 2008
- Noninvasive measurement of dissolved oxygen in shake flasksBiotechnology and Bioengineering, 2002
- Micro-heterogeneous Oxygen Response in Luminescence Sensor FilmsLangmuir, 2000
- XPS study of Nb-doped oxygen sensing TiO2 thin films prepared by sol-gel methodThin Solid Films, 1998