Experimental Investigation and Modeling of Force-Induced Surface Errors for the Robot-Assisted Milling Process
Open Access
Abstract
A series of experiments were performed aiming at controlling milling force-induced surface errors in the robot-assisted milling process, for the sub-area of the multi-stiffener reinforced inner wall of complex cylindrical thin-walled casting parts, to investigate the relationship between surface errors, milling forces, and robot-assisted milling parameters. Firstly, based on the design of experiments (DoE) method, milling forces and surface errors were investigated based on a series of experiments with different groups of milling parameters. Secondly, the modeling of milling forces, surface errors, and milling parameters was realized by means of response surface methodology (RSM), then the parametric expression was obtained of the robot-assisted milling process. Finally, the parameters of the milling process toward the surface error were obtained based on an evolutionary algorithm. The results show that the surface errors are different for the different milling styles of down milling and up milling. In up milling processes, the surface errors are positive, and the actual material removal amounts are generally higher than the nominal ones, while negative in down milling processes. The surface errors induced by milling forces can be effectively controlled and reduced using process optimization in the robot-assisted milling process, while maintaining relatively high milling forces and high machining efficiency. This provides theoretical support for industry applications.Keywords
Funding Information
- National Natural Science Foundation of China (52205487, 2021110B048, USCAST2021-19)
- JCKY Research Program (52205487, 2021110B048, USCAST2021-19)
- SAST–SJTU fund (52205487, 2021110B048, USCAST2021-19)
- Startup Fund for Young Faculty at SJTU (SFYS at SJTU) (52205487, 2021110B048, USCAST2021-19)
This publication has 39 references indexed in Scilit:
- Influence of milling strategy on the surface roughness in ball end milling of the aluminum alloy Al7075-T6Measurement, 2012
- Empirical Modeling and Analysis of Surface Roughness in Milling Process of Nickel-Based Super Alloy Nimonic 115 through Response Surface MethodologyAdvanced Materials Research, 2011
- Optimization of tool geometry parameters for turning operations based on the response surface methodologyMeasurement, 2011
- Accurate robotic belt grinding of workpieces with complex geometries using relative calibration techniquesRobotics and Computer-Integrated Manufacturing, 2009
- Virtual Simulation and Optimization of Milling Applications—Part II: Optimization and Feedrate SchedulingJournal of Manufacturing Science and Engineering, 2008
- A local process model for simulation of robotic belt grindingInternational Journal of Machine Tools and Manufacture, 2007
- Parameters optimization of a nano-particle wet milling process using the Taguchi method, response surface method and genetic algorithmPowder Technology, 2007
- Prediction of cutting force in end-milling operation of modified AISI P20 tool steelJournal of Materials Processing Technology, 2007
- Analytical models for high performance milling. Part II: Process dynamics and stabilityInternational Journal of Machine Tools and Manufacture, 2006
- Robotic grinding and polishing for turbine-vane overhaulJournal of Materials Processing Technology, 2002