Fabrication of new multifunctional cotton–modal–recycled aramid blended protective textiles through deposition of a 3D-polymer coating: high fire retardant, water repellent and antibacterial properties
- 26 June 2020
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 44 (28) , 12122-12133
Abstract
This study reports a facile fabrication of multifunctional cotton–modal–recycled aramid blended protective textiles through the deposition of a three-dimensional tetrakis(hydroxymethyl)phosphonium chloride (THPC)–urea polymer coating. For this, blended fabrics with different compositions, weaving structures, thicknesses, GSMs and thread densities have been fabricated, followed by chemical deposition of the THPC–urea polymer coating on the fibrils of the yarn and then in the amorphous region through ammonia treatment. Full characterization of the resulting fabrics through SEM and FTIR allowed confirmation of the deposition of THPC–urea on each blended fabric. Treated and untreated samples were evaluated for their water repellency, flame retardance and antibacterial properties through diverse experimental tools. The results show that the lowest average char length (warp – 3.18 cm, weft – 2.84 cm) and radiant heat flux density (11.021 kW m−2), and highest LOI% (36.8%), were found in the 40%-cotton–30%-modal–30% aramid fabric, whereas the best thermal protective performance (t12 – 4.0 s, t24 – 5.9 s) was observed in the fabric with a high thickness and GSM. Regarding the water repellent properties, all treated samples showed superior water repellence properties expressed as water contact angle (θ H2O ) as high as 141.70° to 151.50°. Besides, the 3D polymer coating deposited on blended fabrics exhibited high antibacterial properties (99.90%) against Staphylococcus aureus ATCC 6538 and Klebsiella pneumoniae ATCC 4352 as calculated according to the KS K 0693:2016 method. These results herein provide fundamental grounds to design blended textiles with necessary functionalities for smart and protective applications.Keywords
Funding Information
- Ministry of Trade, Industry and Energy (R0004921)
This publication has 40 references indexed in Scilit:
- Modification of fibrous membrane for organic and pathogenic contaminants removal: from design to applicationRSC Advances, 2020
- Occurrence of the potent mutagens 2- nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particlesScientific Reports, 2019
- Development of new multifunctional filter based nonwovens for organics pollutants reduction and detoxification: High catalytic and antibacterial activitiesChemical Engineering Journal, 2019
- Efficient Dyeing Mechanism of Cotton/Polyester Blend Knitted FabricFibers and Polymers, 2018
- Advances and applications of chemical protective clothing systemJournal of Industrial Textiles, 2018
- Performance enhancement of fire retardant finish with environment friendly bio cross-linker for cottonJournal of Cleaner Production, 2013
- Functional textiles for improved performance, protection and health2011
- Epoxy phosphonate crosslinkers for providing flame resistance to cotton textilesPolymers for Advanced Technologies, 2007
- Military Protective Clothing: Implications for Clothing and Textiles Curriculum and ResearchClothing and Textiles Research Journal, 1993
- Flame—Retarding Textile FibersIndustrial & Engineering Chemistry, 1970