Design and Ballistic Penetration of “SiC/Ti6Al4V/UHMWPE” Composite Armor
Authors:
- Yongji GaoYGYongji Gao
- Xinya FengXFXinya Feng
- Jinxu LiuJLJinxu Liu
- Haidong FuHFHaidong Fu
- Shukui LiSLShukui Li
- Chuan HeCHChuan He
Open Access
- 1 July 2019
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 563 (4)
Abstract
The penetration resistance of “SiC/Ti6Al4V/UHMWPE” composite armor, which involves four different constructions at the same area density, has been designed and presented against 12.7 mm armor piercing (AP) projectiles experimentally. Three armor materials, including silicon carbide (SiC), Ti6Al4V, and ultra-high molecular weight polyethylene (UHMWPE) fiber composite, were prepared together with the investigation on their mechanical properties. Subsequently the composite armors were manufactured by adhesive technology. The ballistic test results show that the target of SiC/UHMWPE and Ti6Al4V/UHMWPE exhibits better penetration resistance against 12.7 mm AP. The study on the protective mechanism indicates that the thicker ceramic front layer can prolong the interaction time with the projectile, causing more energy dissipation by blunting, eroding, and breaking the projectile efficiently and then the thicker UHMWPE backing layer can fully utilize the tensile deformation of fibers to absorb the remaining energy of the projectile. The enlarged loading area of UHMWPE backing plate caused by the deviation of projectile and the petalling fracture of Ti6Al4V can help to fully develop the tensile deformation of fibers, resulting in more energy absorption. For the target of SiC/Ti6Al4V/UHMWPE, Ti6Al4V interlayer contributes to enhancing the ballistic penetration resistance of composite armors by supporting the front ceramic layer and enlarging the loading area of UHMWPE backplate. However, the insertion of Ti6Al4V partly reduces the thickness of SiC layer and UHMWPE composite layer at the equal areal density of the system, leading to the poorer ballistic penetration resistance of the target of SiC/Ti6Al4V/UHMWPE than that of SiC/UHMWPE and Ti6Al4V/UHMWPE.Keywords
This publication has 24 references indexed in Scilit:
- An experimental and numerical investigation of the ballistic response of multi-level armour against armour piercing projectilesInternational Journal of Impact Engineering, 2017
- Study on Protection Mechanism of 30CrMnMo-UHMWPE Composite ArmorMaterials, 2017
- Ballistic performance of Al2O3 mosaic armors with gap-filling materialsCeramics International, 2017
- Design and ballistic penetration of the ceramic composite armorComposites Part B: Engineering, 2016
- Influence of different back laminate layers on ballistic performance of ceramic composite armorMaterials & Design, 2015
- Ballistic impact simulation of an armour-piercing projectile on hybrid ceramic/fiber reinforced composite armoursInternational Journal of Impact Engineering, 2012
- Ballistic performance of multi-layered metallic plates impacted by a 7.62-mm APM2 projectileInternational Journal of Impact Engineering, 2011
- Numerical simulation of ceramic composite armor subjected to ballistic impactComposites Part B: Engineering, 2010
- Ballistic performance of armour ceramics: Influence of design and structure. Part 1Ceramics International, 2010
- Investigation on the ballistic impact behavior of various alloys against 7.62mm armor piercing projectileMaterials & Design (1980-2015), 2008