All SiC PWM rectifier‐based off‐board ultrafast charger for heavy electric vehicles
Authors:
Open Access
- 1 February 2020
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 13 (3) , 483-494
Abstract
This study deals with the design, implementation and experimental performance of all silicon carbide pulse width modulation (SiC PWM) rectifier‐based off‐board ultrafast chargers (UFCs) for lithium titanate batteries of heavy electric vehicles. Different UFC configurations are proposed, depending upon the nominal battery voltage (400–1000 V DC) and charge capacity. Operating principles and control of UFC at unity and leading power factors are assessed and corresponding operating modes of PWM rectifier are discussed. The combined effect of reverse conduction characteristic of SiC power metal oxide semiconductor field effect transistor (MOSFET) and built‐in SiC Schottky diode is taken into account in all the analyses carried out. The operating performance of the developed UFC, such as the switching characteristics of SiC power MOSFET modules, efficiency, input current total demand distortion (ITDD), and thermal limitations of the SiC PWM rectifier have been assessed for various charge voltages and charge capacities, both by computer simulations and laboratory tests. Power circuit layout considerations of the proposed system are also given in this study. Excellent performance results for 10 kHz switching frequency are obtained from the developed 200 kW UFC, with operating efficiencies higher than 98.5% for all charging rates up to five times the battery capacity, and ITDDs <2.2% for the whole operating range.Keywords
This publication has 18 references indexed in Scilit:
- Experimental Validation of a Novel Architecture Based on a Dual-Stage Converter for Off-Board Fast Battery Chargers of Electric VehiclesIEEE Transactions on Vehicular Technology, 2017
- Power-Loss Analysis and Efficiency Maximization of a Silicon-Carbide MOSFET-Based Three-Phase 10-kW Bidirectional EV Charger Using Variable-DC-Bus ControlIEEE Journal of Emerging and Selected Topics in Power Electronics, 2016
- Modelling of lithium‐titanate battery with ambient temperature effect for charger designIET Power Electronics, 2016
- Design and Implementation of a 75-kW Mobile Charging System for Electric VehiclesIEEE Transactions on Industry Applications, 2015
- Butler–Volmer-Equation-Based Electrical Model for High-Power Lithium Titanate Batteries Used in Electric VehiclesIEEE Transactions on Industrial Electronics, 2015
- Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid VehiclesIEEE Transactions on Power Electronics, 2013
- Design of an 11 kW power factor correction and 10 kW ZVS DC/DC converter for a high-efficiency battery charger in electric vehiclesIET Power Electronics, 2012
- Power battery charger for electric vehiclesIET Power Electronics, 2011
- Modelling, design and optimisation of a battery charger for plug-in hybrid electric vehiclesIET Electrical Systems in Transportation, 2011
- A Review of Three-Phase Improved Power Quality AC–DC ConvertersIEEE Transactions on Industrial Electronics, 2004