Characterization and Design of Three-Phase Particulate Composites: Microstructure-Free Finite Element Modeling vs. Analytical Micromechanics Models
Open Access
- 10 September 2023
- Vol. 16 (18) , 6147
Abstract
Three-phase particulate composites offer greater design flexibility in the selection of phase materials and have more design variables than their two-phase counterparts, thus providing larger space for tailoring effective properties to meet intricate engineering requirements. Predicting effective elastic properties is essential for composite design. However, experimental methods are both expensive and time intensive, whereas the scope of analytical micromechanics models is limited by their inherent assumptions. The newly developed microstructure-free finite element modeling (MF-FEM) approach has been demonstrated to be accurate and reliable for two-phase particulate composites. In this study, we investigate whether the MF-FEM approach can be applied to three-phase particulate composites and, if applicable, under which conditions. The study commences with a convergence analysis to establish the threshold ratio between the element size and the RVE (representative volume element) dimension. We then validate the MF-FEM approach using experimental data on three-phase composites from the existing literature. Subsequently, the MF-FEM method serves as a benchmark to assess the accuracy of both traditional and novel analytical micromechanics models, in predicting the effective elasticity of two distinct types of three-phase particulate composites, characterized by their small and large phase contrasts, respectively. We found that the threshold element-to-RVE ratio (1/150) for three-phase composites is considerably smaller than the ratio (1/50) for two-phase composites. The validation underscores that MF-FEM predictions align closely with experimental data. The analytical micromechanics models demonstrate varying degrees of accuracy depending on the phase volume fractions and the contrast in phase properties. The study indicates that the analytical micromechanics models may not be dependable for predicting effective properties of three-phase particulate composites, particularly those with a large contrast in phase properties. Even though more time-intensive, the MF-FEM proves to be a more reliable approach than the analytical models.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada (RGPIN-2019-05372)
This publication has 25 references indexed in Scilit:
- On The Analytical Modelling Of Elastic Properties For Some Particle - Reinforced Aluminum Matrix CompositesScience and Engineering of Composite Materials, 2000
- Several variations of the generalized self-consistent method for hybrid compositesComposites Science and Technology, 1994
- Some elastic properties of reinforced solids, with special reference to isotropic ones containing spherical inclusionsInternational Journal of Engineering Science, 1984
- Solutions for effective shear properties in three phase sphere and cylinder modelsJournal of the Mechanics and Physics of Solids, 1979
- The Elastic Properties of Three-Phase CompositesJournal of Composite Materials, 1967
- On the elastic moduli of some heterogeneous materialsJournal of the Mechanics and Physics of Solids, 1965
- A self-consistent mechanics of composite materialsJournal of the Mechanics and Physics of Solids, 1965
- A variational approach to the theory of the elastic behaviour of multiphase materialsJournal of the Mechanics and Physics of Solids, 1963
- The Elastic and Thermo-elastic Properties of Composite MediaProceedings of the Physical Society. Section B, 1956
- Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper KörperAnnalen der Physik, 1889