Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yunhua Luo has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Open-Access Crystal Plasticity Finite Element Implementation in ANSYS for Dislocation-Induced Nanoindentation in Magnesium

    by Syed Taha Khursheed, Moein Imani Foumani, Yunhua Luo, Guo-Zhen Zhu

    This study focuses on developing and implementing crystal plasticity finite element modeling (CPFEM) codes on the ANSYS platform. The code incorporates a plasticity constitutive law that describes the behaviors of basal, prismatic, and pyramidal slips in magnesium, and is validated against plane-strain compression experiments and simulations using established codes on the ABAQUS CAE platform. The validated CPFEM code is applied to simulate the dislocation-induced nanoindentation response of pure magnesium across different crystallographic orientations, allowing visualization of strain distributions associated with different slips. Consistent with experimental observations, basal slip is identified as the primary active slip, whereas prismatic and pyramidal slips show varying activities with respect to the direction of the indentation. Novelty arises from an ANSYS–native CPFEM implementation that is cross-validated against published ABAQUS simulations and an experiment under a single, consistent constitutive set. This framework enables orientation-resolved mapping of slip system activity and subsurface strain fields under spherical nanoindentation, providing analysis capability seldom available in prior ANSYS–based studies.


  • Open Access

    Voxel-Based Finite Element Investigation of Micromechanics Models for Stiffness Prediction of Cross-Ply Laminates

    by Darya Forooghi, Yunhua Luo

    Laminate plate and shell structures with symmetric cross-ply configurations are widely used due to their high stiffness-to-weight ratio. However, conventional lamination theories rely on simplifying assumptions that may introduce inaccuracies. This study evaluates the predictive capability of such theories by integrating multiple micromechanics models with First-Order Shear Deformation Theory (FSDT), and comparing the results against voxel-based finite element modeling (VB-FEM), which serves as a high-fidelity numerical reference. A range of models—including Voigt–Reuss, Chamis, Halpin–Tsai, Bridging, and two iterative isotropized formulations—are assessed for unidirectional laminae with fiber volume fractions from 40% to 73%. Quantitative comparison reveals that while all models predict the longitudinal modulus accurately, significant deviations arise in predicting transverse and shear properties. The Bridging Model consistently yields the closest agreement with VB-FEM across all five elastic constants, maintaining accuracy even at high volume fractions where the modified Halpin–Tsai model begins to fail. Discrepancies in micromechanics-based lamina properties propagate to laminate-level stiffness predictions, highlighting the critical role of model selection. These findings establish VB-FEM as a valuable tool for validating analytical models and guide improved modeling strategies for laminated composite design.


  • Open Access

    Hip Fractures: Clinical, Biomaterial and Biomechanical Insights into a Common Health Challenge

    by Yunhua Luo

    Hip fractures represent a significant public health challenge, particularly among the elderly, due to their high incidence, morbidity, and mortality rates. This review provides a comprehensive understanding of hip fractures through clinical, biomaterial, and biomechanical perspectives. Clinically, we examined key risk factors, including age, bone mineral density, and the high prevalence of falls, which account for over 95% of hip fractures. However, current clinical tools, such as FRAX, have notable limitations in accurately assessing fracture risk in individuals due to their reliance on statistical models, the treatment of interdependent risk factors as independent, and the omission of key variables like diabetes. From a biomaterial perspective, we analyzed bone composition—specifically the balance of inorganic minerals, organic proteins, and water—and its role in determining bone strength and fracture susceptibility. Various risk factors ultimately influence this composition balance, thereby affecting bone strength. Therefore, accurately measuring bone composition may provide a more reliable assessment of hip fracture risk. Although emerging imaging technologies such as dual-energy CT and MRI show promise for in vivo assessments of bone composition, these techniques still face significant challenges and remain an active area of research. Biomechanically, we explored the forces generated during falls, noting that impact forces can vastly exceed normal physiological loads and may exploit the anisotropic properties of bone, leading to fractures even in healthy individuals with strong bones. This understanding emphasizes the critical role of fall prevention in reducing fracture risk and highlights the limitations of using fall-induced fracture incidence as a validation metric for clinical assessment tools. Lastly, we discuss preventive strategies, including passive measures like environmental modifications for individuals diagnosed with low bone strength and proactive measures such as muscle strengthening and cognitive training. While passive measures are necessary for immediate protection, proactive strategies are more effective in the long term by addressing underlying risk factors for falls and promoting sustained bone health. This interdisciplinary review underscores the need to integrate clinical, biomaterial, and biomechanical factors to improve diagnostic accuracy, prevention, and treatment strategies for hip fractures, ultimately advancing public health outcomes in aging populations.


  • Open Access

    Impact of Regular and Irregular Pore Distributions on the Elasticity of Porous Materials: A Microstructure-Free Finite Element Study

    by Prajjayini Chakma, Yunhua Luo

    Conventional analytical formulas for predicting the effective Young’s modulus of porous materials often rely on simplifying assumptions and do not explicitly incorporate microstructural information. This study investigates the impact of regular versus irregular pore distributions on the stiffness of porous materials using microstructure-free finite element modeling (MF-FEM). After conducting a convergence study, MF-FEM predictions were validated against experimental data and used to assess the accuracy of commonly employed analytical models. The results demonstrate that materials with irregular microstructures exhibit a rapid decrease in Young’s modulus, approaching zero at porosities slightly greater than 50%. In contrast, regular microstructures show a more gradual decline, maintaining significant stiffness until the porosity exceeds 90%. Additionally, the study reveals that some analytical formulas align better with irregular microstructures while others are more suited to regular ones, attributable to the underlying assumptions of these models. These findings underscore the necessity of considering pore distribution patterns in modeling to accurately predict the mechanical behavior of porous materials.


  • Open Access

    Toward Fully Automated Personalized Orthopedic Treatments: Innovations and Interdisciplinary Gaps

    by Yunhua Luo

    Personalized orthopedic devices are increasingly favored for their potential to enhance long-term treatment success. Despite significant advancements across various disciplines, the seamless integration and full automation of personalized orthopedic treatments remain elusive. This paper identifies key interdisciplinary gaps in integrating and automating advanced technologies for personalized orthopedic treatment. It begins by outlining the standard clinical practices in orthopedic treatments and the extent of personalization achievable. The paper then explores recent innovations in artificial intelligence, biomaterials, genomic and proteomic analyses, lab-on-a-chip, medical imaging, image-based biomechanical finite element modeling, biomimicry, 3D printing and bioprinting, and implantable sensors, emphasizing their contributions to personalized treatments. Tentative strategies or solutions are proposed to address the interdisciplinary gaps by utilizing innovative technologies. The key findings highlight the need for the non-invasive quantitative assessment of bone quality, patient-specific biocompatibility, and device designs that address individual biological and mechanical conditions. This comprehensive review underscores the transformative potential of these technologies and the importance of multidisciplinary collaboration to integrate and automate them into a cohesive, intelligent system for personalized orthopedic treatments.


  • Open Access

    Strain-Energy-Density Guided Design of Functionally Graded Beams

    by Yunhua Luo

    Functionally graded materials (FGMs) are revolutionizing various industries with their customizable properties, a key advantage over traditional composites. The rise of voxel-based 3D printing has furthered the development of FGMs with complex microstructures. Despite these advances, current design methods for FGMs often use abstract mathematical functions with limited relevance to actual performance. Furthermore, conventional micromechanics models for the analysis of FGMs tend to oversimplify, leading to inaccuracies in effective property predictions. To address these fundamental deficiencies, this paper introduces new gradation functions for functionally graded beams (FGBs) based on bending strain energy density, coupled with a voxel-based design and analysis approach. For the first time, these new gradation functions directly relate to structural performance and have proven to be more effective than conventional ones in improving beam performance, particularly under complex bending moments influenced by various loading and boundary conditions. This study reveals the significant role of primary and secondary gradation indices in material composition and distribution, both along the beam axis and across sections. It identifies optimal combinations of these indices for enhanced FGB performance. This research not only fills gaps in FGB design and analysis but also opens possibilities for applying these concepts to other strain energy density types, like shearing and torsion, and to different structural components such as plates and shells.


  • Open Access

    Characterization and Design of Three-Phase Particulate Composites: Microstructure-Free Finite Element Modeling vs. Analytical Micromechanics Models

    by Sebak Oli, Yunhua Luo

    Three-phase particulate composites offer greater design flexibility in the selection of phase materials and have more design variables than their two-phase counterparts, thus providing larger space for tailoring effective properties to meet intricate engineering requirements. Predicting effective elastic properties is essential for composite design. However, experimental methods are both expensive and time intensive, whereas the scope of analytical micromechanics models is limited by their inherent assumptions. The newly developed microstructure-free finite element modeling (MF-FEM) approach has been demonstrated to be accurate and reliable for two-phase particulate composites. In this study, we investigate whether the MF-FEM approach can be applied to three-phase particulate composites and, if applicable, under which conditions. The study commences with a convergence analysis to establish the threshold ratio between the element size and the RVE (representative volume element) dimension. We then validate the MF-FEM approach using experimental data on three-phase composites from the existing literature. Subsequently, the MF-FEM method serves as a benchmark to assess the accuracy of both traditional and novel analytical micromechanics models, in predicting the effective elasticity of two distinct types of three-phase particulate composites, characterized by their small and large phase contrasts, respectively. We found that the threshold element-to-RVE ratio (1/150) for three-phase composites is considerably smaller than the ratio (1/50) for two-phase composites. The validation underscores that MF-FEM predictions align closely with experimental data. The analytical micromechanics models demonstrate varying degrees of accuracy depending on the phase volume fractions and the contrast in phase properties. The study indicates that the analytical micromechanics models may not be dependable for predicting effective properties of three-phase particulate composites, particularly those with a large contrast in phase properties. Even though more time-intensive, the MF-FEM proves to be a more reliable approach than the analytical models.