Photonic sintering of copper for rapid processing of thick film conducting circuits on FTO coated glass
Open Access
- 28 March 2023
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-12
Abstract
Copper potentially provides a cost-effective replacement for silver in printed electronic circuitry with diverse applications in healthcare, solar energy, IOT devices and automotive applications. The primary challenge facing copper is that it readily oxidizes to its non-conductive state during the sintering process. Photonic sintering offers a means of overcoming the oxidation by which rapid conversion from discrete nano-micro particles to fully or partially sintered products occurs. An experimental study of flash lamp sintering of mixed nano copper and mixed nano/ micro copper thick film screen printed structures on FTO coated glass was carried out. It shows that there may be multiple energy windows which can successfully sinter the thick film copper print preventing detrimental copper oxidation. Under optimum conditions, the conductivities achieved in under 1 s was (3.11–4.3 × 10–7 Ω m) matched those achieved in 90 min at 250 °C under reducing gas conditions, offering a significant improvement in productivity and reduced energy demand. Also present a good film stability of a 14% increase in line resistance of 100 N material, around 10% for the 50N50M ink and only around 2% for the 20N80M.Keywords
Funding Information
- EPSRC (EP/N509553/1)
This publication has 29 references indexed in Scilit:
- Flash light sintering of ag mesh films for printed transparent conducting electrodeThin Solid Films, 2017
- Photonic flash-annealing of lead halide perovskite solar cells in 1 msJournal of Materials Chemistry A, 2016
- Inkjet-printed copper electrodes using photonic sintering and their application to organic thin-film transistorsOrganic Electronics, 2015
- Flash light sintered copper precursor/nanoparticle pattern with high electrical conductivity and low porosity for printed electronicsThin Solid Films, 2015
- Highly conductive copper nano/microparticles ink via flash light sintering for printed electronicsNanotechnology, 2014
- Flash light sintering of nickel nanoparticles for printed electronicsThin Solid Films, 2014
- Copper Nanoparticles: Aqueous Phase Synthesis and Conductive Films Fabrication at Low Sintering TemperatureACS Applied Materials & Interfaces, 2013
- Comparative studies on thermal and laser sintering for highly conductive Cu films printable on plastic substrateThin Solid Films, 2012
- Low temperature nanoparticle sintering with continuous wave and pulse lasersOptics & Laser Technology, 2011
- Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation StabilityMaterials, 2010