Abstract
This paper presents the design and experimental measurement of a fully integrated gate driver fabricated together with a 200-V GaN power switch in a GaN-on-SOI technology. The driver exploits 20-V low-voltage enhancement-mode HEMTs (E-HEMTs), Metal-Insulator-Metal (MIM) bootstrap capacitors and two-dimensional electron gas (2DEG) resistors. To overcome the inherent lack of p-channel devices in the GaN technology, the design employs the bootstrapping approach which allows for full turn-on of the 200-V power GaN switch while minimizing static power consumption. Furthermore, the relatively high breakdown voltage (20 V) of the low-power E-HEMTs allows them to withstand the high voltages generated during bootstrapping. Static power consumption is further reduced by minimizing the number of ratioed logic inverters and implementing an anti-cross-conduction network to eliminate cross-conduction switching losses. The design also leverages the third quadrant of the HEMTs’ IDS-VDS characteristic to emulate the diode behavior, potentially reducing external component requirements. Measured performance reveals an average gate driver current consumption ranging from 370 μA at -40 ∘C to 150 μA at 150 ∘C. Additionally, the rise and fall times when driving the power switch with 365-mΩ on-resistance are respectively 6.5 ns and 3.5 ns at room temperature.
Funding Information
  • European Commission through Project ASCENT+: Access to European Infrastructure for Nanoelectronics funded (H2020, 871130)