Analysis of the Manufacturing Variables of Binderless Panels Made of Leaves of Olive Tree (Olea europaea L.) Pruning Waste
Open Access
Abstract
While the construction industry consumes more raw materials than any other industrial sector, agriculture generates a large amount of waste that is not managed properly. The olive industry produces more than 7.5 million tons of waste that could be recovered. This paper presents a new method to valorize the leaves of olive tree pruning waste consisting of the manufacture of ecologic boards without adhesives by hot pressing. In order to analyze their influence, three manufacturing variables were varied to obtain the boards: leaf type (shredded and whole leaves), temperature (130, 140 and 150 °C) and time (4, and 12 min). Twenty-four boards were made and were then tested for their mechanical, physical and thermal properties according to the EN standards. The boards showed good results of thickness swelling (TS), water absorption (WA) and of thermal conductivity and can be used as an alternative for manufacturing thermal insulation boards. With a smaller particle size of shredded leaves, longer pressing times and higher pressing temperatures, the mechanical behavior of the boards could improve. The olive leaves are a low-cost renewable resource, and manufacturing products with a long, useful life can be beneficial to the environment.Keywords
Funding Information
- Aitana, Actividades de Construcciones y Servicios, S.L. (4/20)
This publication has 47 references indexed in Scilit:
- Contribution to the development of product category rules for ceramic bricksJournal of Cleaner Production, 2015
- Biorefinery based on olive biomass. State of the art and future trendsBioresource Technology, 2014
- Biorefining of olive tree (Olea europea) pruningBiomass and Bioenergy, 2013
- The potential for using the sycamore (Platus orientalis) leaves in manufacturing particleboardInternational Journal of Environmental Science and Technology, 2013
- Characterization of raw materials and manufactured binderless particleboard from oil palm biomassMaterials & Design (1980-2015), 2011
- Industrial harvesting of olive tree pruning residue for energy biomassBioresource Technology, 2010
- Antioxidant activity of the phenolic compounds released by hydrothermal treatments of olive tree pruningFood Chemistry, 2009
- Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard compositesWaste Management, 2009
- Potential use of olive by-products in ruminant feeding: A reviewAnimal Feed Science and Technology, 2008
- Biological, physical and mechanical properties of particleboard manufactured from waste tea leavesInternational Biodeterioration & Biodegradation, 1998