Abstract
River confluences are locations where two or more rivers merge and continue to flow as a single stream. At a confluence, hydrodynamics, sediment transport processes, and morpho-dynamics influence and modify each other. The flow structure of the confluence zone interacts with the sediment transport, which results in bed morphology changes. In this study, two experiments were carried out in the large-scale open channel confluence of İzmir Kâtip Çelebi University Hydraulics Laboratory, where two symmetrical tributaries forming a right-angle lead to a main channel. While the flow rate from each tributary was equal and 20 l/s for both experiments, the sediment loads were set as 0 kg/min in both tributaries in one experiment and 0.1 kg/min in both tributaries in the other one. The flow depth at the downstream of the confluence was adjusted to be 5.0 cm on top of a 20.0 cm deep sand layer on the bed. The bed topography and the water surface were measured at the end of the experiments (t = 15 h) by using the distance measurement feature of a Vectrino probe and three ULS-40D probes, respectively. The results of the experiment where sand was supplied to the tributaries essentially confirmed the morphological model of mobile bed confluences reported in the literature as applying to asymmetrical confluences (including two tributary mouth bars, two bank-attached bars, one central scour hole and one mid main-channel bar), whereas the clear-water experiment only complied with some results of a limited number of previous equivalent studies.