Shrinkage Behavior of Strength-Gradient Multilayered Zirconia Materials
Open Access
Abstract
To investigate the sintering shrinkage behavior of multigeneration, multilayer zirconia materials using geometrical measurements. Seven zirconia CAD/CAM materials were analyzed, comprising two mono-generation zirconia (HTML: Katana Zr, HTML Plus, 3Y-TZP; UTML: Katana Zr, UTML, 5Y-TZP) and five strength-gradient multilayer zirconia (AIDI: optimill 3D PRO Zir; PRIT: Priti multidisc ZrO2 multicolor; UPCE: Explore Esthetic; ZCPC: IPS e.max ZirCAD Prime; ZYML: Katana YML) materials. Cubes (10 × 10 × 10 mm3) were milled in varying positions within the disks. Geometrical measurements were applied before and after dense sintering using a micrometer screw gauge, light microscopy, as well as surface scans and shrinkages were calculated. Data were analyzed using Kolmogorov–Smirnov, five-way ANOVA followed by the Scheffé post hoc test, and partial eta squared, as well as the Kruskal–Wallis test, including Bonferroni correction (p < 0.05). The highest influence on the shrinkage was exerted by the zirconia material (ηP2 = 0.893, p < 0.001), followed by the test method (ηP2 = 0.175, p < 0.001), while the vertical and horizontal position and measurement point showed no impact on the shrinkage results (p = 0.195–0.763) in the global analysis. Depending on the test method, the pooled shrinkage values of all tested zirconia materials varied between 17.7 and 20.2% for micrometer screw gauge, 17.7 and 20.1% for light microscopy, and 17.8 and 21.1% for surface scan measurements. The shrinkage values measured in the upper, middle, and lower multilayered vertical direction did not differ significantly in the global analysis for the multilayer materials. Therefore, a uniform shrinkage of these strength-gradient multilayer zirconia materials within clinically relevant restorations can be assumed.Keywords
This publication has 24 references indexed in Scilit:
- Recent advances in dental zirconia: 15 years of material and processing evolutionDental Materials, 2024
- Microstructure, composition, and flexural strength of different layers within zirconia materials with strength gradientDental Materials, 2023
- Mechanical properties–translucency–microstructure relationships in commercial monolayer and multilayer monolithic zirconia ceramicsDental Materials, 2022
- Impact of different layers within a blank on mechanical properties of multi-layered zirconia ceramics before and after thermal agingDental Materials, 2022
- The influence of yttria content on the microstructure, phase stability and mechanical properties of dental zirconiaCeramics International, 2022
- Relationships between fracture toughness, Y2O3 fraction and phases content in modern dental Yttria-doped zirconiasJournal of the European Ceramic Society, 2021
- Impact of hydrothermal aging on the light transmittance and flexural strength of colored yttria-stabilized zirconia materials of different formulationsThe Journal of Prosthetic Dentistry, 2021
- Comparison between novel strength-gradient and color-gradient multilayered zirconia using conventional and high-speed sinteringJournal of the Mechanical Behavior of Biomedical Materials, 2020
- Impact of high-speed sintering, layer thickness and artificial aging on the fracture load and two-body wear of zirconia crownsDental Materials, 2020
- Mechanical properties and transformation hardening mechanism in yttria, ceria, neodymia and ytterbia co-doped zirconia based solid solutionsMaterials Chemistry and Physics, 2019