Abstract
In this study, the hot workability of the XH55 superalloy (55Ni-17Cr-12Fe-9Mo-2Nb-1.5Al) was studied in the as-cast condition through hot isothermal compression tests conducted over a temperature range of 850 to 1100°C and strain rates from 10-3 - 10 s-1. The alloy was produced by vacuum induction melting followed by vacuum arc remelting, resulting in the microstructure with dendritic features and M6C carbides. The deformation behaviour was analysed using true stress-strain responses, and a strain-dependent Arrhenius-type constitutive model was developed to predict the flow stress evolution. The model yielded an average activation energy of 583.97 kJ/mol, and its predictive capability was validated through close agreement between experimental and computed flow stresses. A processing map based on the Dynamic Materials Model was constructed to delineate stable and unstable deformation regime. Microstructural observations were correlated with the processing map to facilitate the identification of safe hot-working domains. The optimal deformation windows were determined to be 925 to 975°C at strain rates of 10-3 - 10-2.5 s-1 and 1010 to 1080°C at strain rates of 10-1.5 - 1 s-1, corresponding to processing conditions favorable for dynamic recrystallization through both continuous and discontinuous dynamic recrystallization mechanisms.